Premium quality heat transfer vinyl.

200mm, 300mm and 500m width rolls sold be the linear meter ( enter quantity for number of meters required ).

A5 and A4 sizes sold individually ( enter quantity for number required )

Many sizes and colours available.

Product Details:

PU material-perfect for detailed designs easily to cut/weed.

Perfectly transfer your favourite images to T-shirts,DIY party clothing, ornaments, garments, bags and other fabrics.

Most fabrics are suitable(cotton/polyester/cotton blend fabric).

Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material.

Application instructions:

1.Mirror/Reverse your image design.

2.Place vinyl (gloss side) onto cutting mat.

3.Cut your favourite design with your craft cutter or other cutter machines.

4. Weed the excess material from the design.

5. Put the garment on an even surface and place the design on the garment at the desired position.

6. Apply the target design with an iron or heat press 

              Recommended Settings: (Temperature: 150C(302F) to 160C(320F) Pressure: Medium, Time: 8 ~ 15 seconds ).

7.If using an Iron ensure the irons heat is dispersed evenly across the transfer.

              Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image. 

8.Wait for the vinyl to cool and gently peel off backing after few minutes. Do not dry clean.

9. Note once pressed your vinyl will have a matt finish.

Care Instructions:

Hand wash your fabric gently with mild detergent.

Wait 24 hours after application to wash.

Turn the article of clothing inside out before you wash it.

Does not use any bleaching agents.

Tips:

We recommend performing a test prior to use.

Adjust proper blade speed; cutting press; temperature of heat press or iron; pressure of heat press.

Note: Please be aware that colours may differ slightly to those shown on the screen, this is due to different screen setup's and colour calibration.