50' 14/9 XLP Tray Cable XHHW Insulation PVC Jacket Black 600V

Click Thumbnails to Enlarge

APPLICATION

- 14/9 XLP Tray cable Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger in open air, raceways, channels, conduits and ducts. Approved for direct burial applications and outdoors in cable tray where sunlight resistant rating is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils.

CONDUCTOR

- Fully annealed bare copper per ASTM B-3, Class B stranding per ASTM B-8

INSULATION

- Flame retardant Cross-linked Polyethylene (FR-XLPE) that is heat and moisture resistant. Also has a VW-1 rating and is XHHW-2 per UL 44

JACKET

- Flame and sunlight resistant black PVC rated 90°C wet or dry per UL 1277

ASSEMBLY

- Conductors are cabled together with or without fillers as required to form a round compact cable core with a binder tape.

STANDARDS

- UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors.
- Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC
- Individual conductors pass UL VW-1 flame test and rated XHHW-2/VW1, UL 1581/UL 2556 VW-1
- Rated at 90°C wet or dry
- Heavy Duty” rating per ICEA Standards
- Meets cold bend test at -25°C
- NEMA WC70/ICEA S-95-658, NEMA WC57/ICEA S-73-532
- IEEE 1202 and CSA FT4 70,000 BTU Flame Test
- IEEE 383 70,000 BTU Vertical Flame Test
- ICEA T-29-520 210,000 BTU

COLOR CODE

- ICEA Method 1, Table E-1 Color Code

DISCLAIMER

- Picture May Not Represent Actual Cable and is Only Used As a Representation Please Refer to The Specifications for Product Accuracy.

PRODUCT SPECIFICATIONS

HAVE A LARGE ORDER OVER $5000? ASK US IF WE CAN DO BETTER ON THE PRICE.