Description
USBKILLER V3 USB Killer with Switch USB Computer Killer Metal Shell High Voltage Pulse Generator
Description:
USBKILLER V3 adds a switch (equivalent to the insurance function) to prevent irreversible damage caused by misoperation, and the metal casing has a better texture.
This product is used for USB interface pressure test. It is a test instrument for sustainable output pulse voltage based on the switch boost structure. The input energy is taken from the output of the USB interface itself (5V 1A or higher), so there is no need to charge it. But it requires the output capability of the USB interface: the output voltage is 5V, the error is no more than ±20%, and the current output is not less than 1A. Please follow the instruction, or the product will malfunction.
This product may emit a slight sound during operation. The sound originates from the current sound generated by the discharge control element.
Using:
- This product is plugged into the required USB interface. It will automatically discharge. You only need to record the data you need to measure with other measuring instruments while it is discharging. However, it is recommended that the continuous working time is not more than 10s. In the limit case, it does not exceed 30s. Because the product has many components placed on a very small area, the thermal effect is obvious. Please do not exceed the above working time when there is no good heat dissipation (forced cooling).
- This product is only suitable for computer motherboards, industrial control equipment, medical equipment, test of measuring instruments and other discrete power supply mainframes or their options. Its interface is USB TYPE-A. Not for micro USB, USB type C, Lighting, and other pin-intensive interface, for it may damage the item itself by breaking down the air between the pins.
Appearance & Size:
- Its PCB board is compatible with the shell of universal U disk most of which can be got easily.
Performance:
- Required input 5V/1A.
- The output is a -500V pulse with an average frequency of 4Hz (number of discharges per second).
Figure 1: Continuous Discharging Waveform with Output End Short-circuited
Package Included:
- 1 x USBKILLER V3
Description:
USBKILLER V3 adds a switch (equivalent to the insurance function) to prevent irreversible damage caused by misoperation, and the metal casing has a better texture.
This product is used for USB interface pressure test. It is a test instrument for sustainable output pulse voltage based on the switch boost structure. The input energy is taken from the output of the USB interface itself (5V 1A or higher), so there is no need to charge it. But it requires the output capability of the USB interface: the output voltage is 5V, the error is no more than ±20%, and the current output is not less than 1A. Please follow the instruction, or the product will malfunction.
This product may emit a slight sound during operation. The sound originates from the current sound generated by the discharge control element.
Using:
- This product is plugged into the required USB interface. It will automatically discharge. You only need to record the data you need to measure with other measuring instruments while it is discharging. However, it is recommended that the continuous working time is not more than 10s. In the limit case, it does not exceed 30s. Because the product has many components placed on a very small area, the thermal effect is obvious. Please do not exceed the above working time when there is no good heat dissipation (forced cooling).
- This product is only suitable for computer motherboards, industrial control equipment, medical equipment, test of measuring instruments and other discrete power supply mainframes or their options. Its interface is USB TYPE-A. Not for micro USB, USB type C, Lighting, and other pin-intensive interface, for it may damage the item itself by breaking down the air between the pins.
Appearance & Size:
- Its PCB board is compatible with the shell of universal U disk most of which can be got easily.
Performance:
- Required input 5V/1A.
- The output is a -500V pulse with an average frequency of 4Hz (number of discharges per second).
Figure 1: Continuous Discharging Waveform with Output End Short-circuited
Package Included:
- 1 x USBKILLER V3
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Oct-23-20 at 01:33:15 PDT, seller added the following information: