Tani Logics eBay Listing Template

EVABarrier Beer Line

Double Walled
Free & Fast Delivery

This high quality beer line will keep your beverage in it's best possible condition. EVABarrier double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.

Outer Barrier -
The outer barrier has accurately extruded tolerances and made from an EVA material. It seals well when used with various John Guest, DuoTight or other push in fittings.  The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.

Inner Barrier -
The inner barrier is made from a proprietary polymer that has excellent gas barrier characteristics. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss, so your beer will stay fresher for longer and not lose carbonation like other beer line types can. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is significantly better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.

Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable.  This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.

DESCRIPTION

We will cut this EVABarrier beer line to the length that you require up to a maximum of 12 metres in a single length. Just choose the quantity of metres that you require and we'll ensure that you receive it in one length (up to 12 metres maximum).


**Please see our other items for 12 metre lengths at discounted prices**


Available sizes:


5/16 (8mm) outside diameter x 4mm inside diameter -
This small ID is ideally suited to direct draw systems where only a short beer line is needed. When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap.

5/16 (8mm) outside diameter x 5mm inside diameter -
When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap.

3/8 (9mm) outside diameter x 6mm inside diameter -
This 6mm size is a larger size normally either used for gas or long draw keg systems.  Its not recommended for direct draw kegerators as it does not apply much flow resistance. If you did use this beer line in your kegerator you will need about 6-8meters of beer line to get the adequate flow resistance and for this reason we would normally recommend the smaller 5mm or 4mm ID lines for Kegerator setups.

Pressure Rating:
30°C - 1.4 MPa (200psi)
50°C - 0.7MPa (100psi)

Fast Delivery - All small and medium items sent via Royal Mail First class postage. All large items are sent via one of eBay's one working day delivery partners
Fast Dispatch -  All items dispatched within 24 hours mon - fri

We hope you love your product but if for any reason you want to return it, send it back to us within 14 days and we’ll offer you a full refund.

If you experience any problems with your order or if you’re not fully satisfied with your new product, contact us using the ebay messaging system and we’ll be more than happy to help.

Buyer pays return postage