ARDUINO ONE REV3
ARDUINO UNO REV3 is an ATmega328P based microcontroller board (datasheet). It has 14 digital input / output pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.
Contains everything needed to support the microcontroller; just connect it to a computer with a USB cable or power it with an AC / DC adapter or battery to get started. You can tinker with your ARDUINO UNO REV3 without worrying too much about doing something wrong, in the worst case you can replace the chip and start over.
If you are interested in boards with similar functionality, on Arduino you can find:
Arduino Uno Rev3 SMD
Arduino Uno WiFi Rev2
The package contains: 1 x ARDUINO UNO REV3
TECH SPECS
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
Digital I / O Pins: 14 (of which 6 provide PWM output)
PWM Digital I / O Pins: 6
Analog Input Pins: 6
DC Current for I / O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g
For technical specifications and installation examples, to share opinions and questions, including technical ones, you can consult the dedicated forum: https://forum.arduino.cc/index.php?board=34.0
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renewing their electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
ARDUINO ONE REV3
ARDUINO UNO REV3 is an ATmega328P based microcontroller board (datasheet). It has 14 digital input / output pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.
Contains everything needed to support the microcontroller; just connect it to a computer with a USB cable or power it with an AC / DC adapter or battery to get started. You can tinker with your ARDUINO UNO REV3 without worrying too much about doing something wrong, in the worst case you can replace the chip and start over.
If you are interested in boards with similar functionality, on Arduino you can find:
Arduino Uno Rev3 SMD
Arduino Uno WiFi Rev2
The package contains: 1 x ARDUINO UNO REV3
TECH SPECS
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
Digital I / O Pins: 14 (of which 6 provide PWM output)
PWM Digital I / O Pins: 6
Analog Input Pins: 6
DC Current for I / O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g
For technical specifications and installation examples, to share opinions and questions, including technical ones, you can consult the dedicated forum: https://forum.arduino.cc/index.php?board=34.0
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renewing their electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
Listing created with Store360