Material Application: Attaches wire lath to metal studs or metal to metal.
| Size | Pt | Bulk Part No | Bulk Qty | Lbs* | Drill Cap (in.) | 5lb Part No | 5lb Qty | 1lb Part No | 1lb Qty |
| 8-18 x 1/2 | 2 | M82Z | 10M | 37 | .035 – .100 | M82ZV | 1,300 | M82ZI | 300 |
| 8-18 x 3/4 | 2 | M83Z | 8M | 37 | .035 – .100 | M83ZV | 1,000 | M83ZI | 200 |
| 8-18 x 1 | 2 | M84Z | 5M | 28 | .035 – .100 | M84ZV | 800 | M84ZI | 200 |
| 8-18 x 1-1/4 | 2 | M85Z | 5M | 34 | .035 – .100 | M85ZV | 700 | M85ZI | 150 |
| 8-18 x 1-5/8 | 2 | M87Z | 4M | 32 | .035 – .100 | M87ZV | 600 | M87ZI | 125 |
| 8-18 x 1-7/8 | 2 | M88Z | 2M | 18 | .035 – .100 | M88ZV | 500 | M88ZI | 100 |
| 8-18 x 2-1/2 | 2 | M92Z | 2M | 23 | .035 – .100 | M92ZV | 400 | M92ZI | 80 |
| 8-18 x 3 | 2 | M95Z | 1.5M | 20 | .035 – .100 | M95ZV | 375 | M95ZI | 75 |
| 10-16 x 3/4 | 3 | M106Z | 7M | 38 | .035 – .176 | M106ZV | 1,000 | M106ZI | 200 |
| 10-16 x 4 | 3 | M1032Z | 1M | 20 | .035 – .176 | M1032ZV | 200 | M1032ZI | 50 |
| 12-14 x 3/4 | 3 | M126Z | 4M | 25 | .035 – .210 | M126ZV | 800 | M126ZI | 160 |
| *Carton weights are approximate and may vary. | |||||||||
Specifications
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
- ICC-ES Evaluation Report: ESR-3528
Test Results
| Pullout Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Size | Pt | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 8-18 | 2 | 292 | 479 | 685 | 933 | ||||
| 10-16 | 3 | 293 | 487 | 690 | 941 | 1432 | 2017 | ||
| 12-14 | 3 | 737 | 1034 | 1585 | 2349 | 2911 | |||
| Shear Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Size | Pt | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 8-18 | 2 | 721 | 1031 | 1049 | |||||
| 10-16 | 3 | 709 | 1231 | 1497 | 1508 | ||||
| 12-14 | 3 | 749 | 1320 | 1574 | 1914 | 1929 | |||
| The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes. | |||||||||