Notes on ordering a metric mill
Most of our cutting tools, like center drills, are manufactured in a fractional size. If you have a metric machine with metric holders, like collets or end mill holders, you will need to order fractional holders to accommodate our cutting tools.
Made in the USA!
FEATURE |
5000(5100)/5500(5510) |
5400(5410) |
2000 (2010) |
5800 (5810) |
Max clearance, table to spindle |
8.00" (203 mm) |
8.00" (203 mm) |
9.00" (229 mm) |
14.00″ (356 mm) |
Throat (without headstock spacer) | 2.25" (50 mm) | 2.25" (50 mm) | Adjustable | Adjustable |
Throat (with headstock spacer block) | (Not included) | Included, 3.50" (89 mm) | Not Required | Adjustable |
Travel, "X" Axis |
9.00" (228 mm) |
9.00" (228 mm) |
9.00" (229 mm) |
13.65″ (347 mm) |
Travel, "Y" Axis |
3.00" (76 mm) |
5.00" (127 mm) |
7.00" (178 mm) |
11.00″ (279 mm) |
Travel, "Z" Axis |
6.25" (159 mm) |
6.25" (159 mm). |
5.38" (137 mm) |
9.38″ (238 mm) |
Hole through spindle |
.405" (10 mm) |
.405" (10 mm) |
.405 (10 mm) |
.405 (10 mm) |
Spindle nose thread |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
Spindle taper |
#1 Morse |
#1 Morse. |
#1 Morse |
#1 Morse |
Handwheel graduations |
.001" (.01 mm) |
.001" (.01 mm) |
.001" (.01 mm) |
.001" (.01 mm) |
Width overall* |
14.75" (375 mm) |
15.00" (381 mm) |
15.00 (381 mm) |
20.00 (508 mm) |
Depth overall* |
11.75" (298 mm) |
14.00" (356 mm) |
22.25" (565 mm) |
23.13″ (588 mm) |
Height overall* |
20.75" (527 mm) |
20.75" (527 mm) |
23.38" (568 mm) |
24.50″ (622 mm) |
Table size |
2.75" x 13.00" (70 x 330 mm) |
2.75" x 13.00" (70 x 330 mm) |
2.75" x 13.00" (70 x 330 mm) |
2.75″ x 18.00″ (70 x 457 mm) |
Hold down provision |
2 "T" Slots |
2 "T" Slots |
2 "T" Slots |
3 "T" Slots |
Shipping weight |
33 lb. (15.0 kg) |
40 lb. (16.3 kg) |
42 lb. (17.2 kg) |
50 lb. (22.7 kg) |
Movements in addition to X-, Y- and Z-axes |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 5.5" column travel (in/out) |
Headstock rotation (90° left/right) Column pivot (90° forward/back) Column swing (90° left/right) Column travel (in/out) 5.5″ (140 mm) |
Motor | 90 volt DC with electronic speed control automatically converts any input from 100 VAC to 240 VAC, 50 or 60 Hz. | |||
Spindle speed range |
70-2800 RPM continuously variable by electronic speed control |