SUITS TOYOTA 

Camry - ACV40 - GSV40

Altise - Ateva- Grande - Glx

Se - Touring - Sportivo

06/2006 to 10/2011


1 x  complete after market Transponder Flip Key

Upgrade from your existing separate key and remote to this stylish, super strong remote flip key.


You can program this key yourself if you have an original  Toyota Black master key.

Note: You cannot program it yourself if you have the grey service key.

Comes fully assembled and ready for programming.
 Complete with transponder chip, key blade and remote circuit and new battery


*A locksmith will be required to program the key if you have a grey service key only or if the vehicle is storing 5 keys and will not accept a new key using the on-board procedure


Remote programming procedure:

1.  Key Removed from Ignition, drivers door open, all other doors closed

2.  Insert key into ignition then remove it - do this twice

3.  Close and open the drivers door twice

4.  Insert key into the ignition then remove

5.  Close and open the drivers door twice

6.  Insert the key into the ignition, then close the door

7.  Turn the key from off to on for 2 seconds 

8.  Remove key from ignition (locks should cycle)

9.  Press the Lock and Unlock buttons on the remote at the same time for 1 second

10.  Press and hold any button on the remote for 2 seconds (locks should cycle once for correct programming, or twice if procedure is incomplete)

11.  To close programming, open the door of the vehicle.






                                                                          Transponder chip programming:

 1.  Put Original master key in and out of ignition 5 times. Finish with key in ignition

2.  Open and close door 6 times

3.  Remove original, insert new key

4.  Leave for 60 seconds (or until Security light goes out on dashboard)

5.  After 60 seconds security light stops flashing then you can start car.

6.  Take key out

7.  Open and close  door