High quality double sided universal prototype printed circuit boards.
Perfect for small electronics projects that need transferring from breadboards. Suitable for Arduino, Pi and Teensy etc.
The design is based on the 400 tie point breadboard.
Each board was tested at the time of manufacture.
Check images above for top and bottom trace paths.
Design
Size
Description
Available Colours
Design A
44mm * 90mm * 1.6mm
The diameter of all the plated holes is 1mm.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 3 power rails, they are all connected.
There are a total of 4, 4x2 jumper connections.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 3 power rails, they are all connected.
There are a total of 4, 4x2 jumper connections.
Black, Green, Purple, Red, White, Yellow
Design B
47mm * 90mm * 1.6mm
The diameter of all the plated holes is 1mm.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 3 power rails, they are separate but can be connected via jumpers.
There is extra space between the outer power rails, similar to a breadboard.
There are a total of 3, 4x2 jumper connections.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 3 power rails, they are separate but can be connected via jumpers.
There is extra space between the outer power rails, similar to a breadboard.
There are a total of 3, 4x2 jumper connections.
Black, Green, Purple, Red, White
Design C
44mm * 78mm * 1.6mm
The diameter of all the plated holes is 1mm.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
Similar to design A, smaller board with 5 less columns.
There are 3 power rails, they are all connected.
There are a total of 4, 4x2 jumper connections.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
Similar to design A, smaller board with 5 less columns.
There are 3 power rails, they are all connected.
There are a total of 4, 4x2 jumper connections.
Black, Red, White
Design D
47mm * 174mm * 1.6mm
The diameter of all the plated holes is 1mm.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 5 power rails, they are separate but can be connected via jumpers on either side. The top and bottom power rails are split in the middle like the breadboard.
There is extra space between the outer power rails, similar to a full size breadboard.
There are a total of 2, 4x2 jumper connections.
Pitch is 2.54mm.
There are 4x 2mm mounting holes.
Board material is FR4.
There are 5 power rails, they are separate but can be connected via jumpers on either side. The top and bottom power rails are split in the middle like the breadboard.
There is extra space between the outer power rails, similar to a full size breadboard.
There are a total of 2, 4x2 jumper connections.
Black