ebay template  

WELCOME TO SUPERTECH eBay ONLINE STORE

Clever little gadgets for joining LED strip. 
2/3/4/5/6 Pin 8mm/10mm/12mm Wire to Strip Hippo Clips Connector for LED Strip Unsoldered Snap UK Seller, 

Hippo-M series is professionally made and powerful. Innovative pierce-to-contact technology makes connection such easy and convenient no matter for strip to strip or strip-to-wire, no matter waterproof or non-waterproof.

Hippo-M 8mm 3528 LED Strip Connectors 2 Pin for Single Colour

8mm 3528 LED Strip Connectors is designed for single colour light LED strip such as SMD3528, SMD3014, SMD2835, SMD2016, etc. The workable LED density is from 30LEDs to 120LEDs per meter for both waterproof and non-waterproof tape light. IDC technology make it possible to connect strip light with red / blue VHB foam tape on the back. Coming out as terminal without wire, users can DIY not just board to wire as lead connection purples but also board to board jumper with wire in middle.

Features Hippo-M 8mm 2Pin

  • Allow user to attach 2 conductor wire according to project requirement (Wire Colour, Cross Section, length, etc).
  • Working Voltage DC3V~24V
  • Pin Pitch 3.6mm
  • Polarity QTY 2

Hippo-M 5050 LED Strip Connector 2 Pin for 10mm Single Colour

5050 LED Strip Connector 2 pin is designed for 10mm wide single colour tape light connection, such as SMD5050, SMD5630, SMD2835, SMD5730 and SMD3535, etc. The workable LED quantity is from 30LEDs to 120LEDs per meter. Both non-waterproof IP20 and waterproof IP65 are available including strip-to-wire and strip-to-strip-joint version.

 Features Hippo-M 10mm 2Pin

  • Allow user to attach 2 conductor flat wire according to project requirement (Wire Colour, Cross Section, length, etc)
  • Working Voltage DC3V~24V
  • Pin Pitch 5.0mm
  • Polarity QTY 2

 

Hippo-M 3 Pin LED Strip Connectors for 10mm Dual Colour / Dimmable CCT

3 Pin LED Strip Connectors is made for 10mm wide dual colour / dimmable CCT strip light connection such as SMD5050, SMD5630, SMD2835, SMD5730, and SMD3014, etc. The workable LED density is from 30LEDs to 120LEDs per meter.

 Features Hippo-M 10mm 3Pin

  • Allow user to attach 3 conductor wire according to project requirement. (Wire Colour, Cross Section, length, etc)
  • Working Voltage DC3V~24V
  • Pin Pitch 2.9mm
  • Polarity QTY 3

Hippo-M Solderless RGB LED Strip Connector 5050 10mm 4 Pin

Hippo-M Solderless RGB LED Strip Connector is designed for 10mm wide 5050 colour changing strip light with 4 Solder pad on FPC. Not only constant voltage 12V/24V types but also IC controlled strip. Flame retardant PC housing with 4 low-resistant copper conductors make it possible to coolly run under 5A current in total. And patent IDC terminal design makes splicing such easy and convenient to both strip-to-wire and strip-to-strip application. The workable LED density is from 30LEDs to 90LEDs per meter.

 Features Hippo-M 10mm 4Pin RGB

  • Allow user to attach wire according to project requirement. (Wire Colour, Cross Section, length, etc)
  • Working Voltage DC3V~24V
  • Pin Pitch 2.5mm
  • Polarity QTY 4

White Hippo-M RGBW LED Strip Connector 5 Pin 10mm

Hippo-M RGBW LED Strip Connector 5 Pin 10mm is workable to both RGB + White SMD and RGBW 4-in-1 tape light. IP20 including strip-to-wire and strip-to-strip-joint types.

Features White Hippo-M 10mm 5Pin RBGW

  •  Allow user to attach 5 conductor flat wire according to project requirement (Wire Colour, Cross Section, length, etc)
  • Working Voltage DC3V~36V
  • Pin Pitch 2.4mm
  • Polarity QTY 5

Hippo-M RGBW LED Strip Connector 5 Pin 12mm

Hippo-M RGBW LED Strip Connector 5 Pin 12mm is workable to both RGB + White SMD and RGBW 4-in-1 tape light. IP65/IP54 available including strip-to-wire and strip-to-strip-joint types.

Features Hippo-M 12mm 5Pin RBGW

  •  Allow user to attach 5 conductor flat wire according to project requirement (Wire Colour, Cross Section, length, etc)
  • Working Voltage DC3V~36V

Note:

  • The photos and videos are for reference only; and might not match 100% to the product you received.
  • Please use a qualified electrician if you are not confident with electricity. It states in the instructions that if you fit yourself, returns will not be accepted if the switch fails. Take this job at your own risk.