The Journeyman-Pro CWP Flanged inlets use offset dimensions. These are accordance with the standard dimensions of 2-Gang boxes made by various manufacturers. These will fit any of the below boxes, the deeper boxes and design thereof may make wiring easier than a standard depth 2-Gang box.
*Note: The mounting holes will only align when placed in the correct orientation. See attached drawing for reference.
Several other manufacturers then those listed here make 2-Gang boxes, we have not tested every brand there is, you have many more choices than listed below. These have been tested as to fit and function. Several of these listed here have other hole placements, most notably on the PVC conduit type boxes.
Made under these brands; Hubbell, Bell, Raco, Pass & Seymour, Taymac
Non-Metallic 2-Gang Deep Boxes (PVC) (Vol 33.5 Cu In)
Part#: PDBD77550GY Seven
Threaded Outlets; Three 1/2" or 3/4" Holes (Gray)
Part#: PDBD77550WH Seven Threaded Outlets; Three 1/2" or 3/4" Holes
(White)
Metallic 2-Gang Deep Boxes (Aluminum) (Vol 36 Cu In)
Part#: 5388-0 Five 3/4 in. Threaded Outlets, Gray
Part#: 5389-0 Five 1 in. Threaded Outlets, Gray
*Deep 2-Gang Boxes (aluminum) (Vol 40 Cu In) Made by Topaz-USA
Part# WDB2550 Five
1/2 in. Threaded Outlets, Gray
Part#: WDB2575 Five
3/4 in. Threaded Outlets, Gray
Part#: WDB25100 Five 1 in. Threaded Outlets, Gray
**Deepest 2-Gang Boxes (aluminum) (Vol 42 Cu In) Made by Red Dot
Part#: 2IHD5-1 Five
1/2 in. Threaded Outlets, Gray
Part#: 2IHD5-2 Five 3/4 in. Threaded Outlets, Gray
Part#: 2IHD5-3 Five
1 in. Threaded Outlets, Gray
Conduit Type, cement fittings - Non-Metallic 2-Gang Boxes (PVC)
Made by; Cantex (Vol 36 Cu In), Carlon (Vol 32 Cu In)
Part#: 5133380, E9802D One 1/2" Holes - Type FSE
Part#: 5133381, E9802E One
3/4" Holes - Type FSE
Part#: 5133382,
E9802F One 1" Holes - Type FSE
Part#: 5133370, E9812D Two 1/2" Holes - Type FSC
Part#: 5133371, E9812E Two 3/4" Holes - Type FSC
Part#: 5133372,
E9812F Two
1" Holes - Type FSC