About Snap Pliers Set:
- Pliers can be used with T3, T5, T8 Buttons (plastic and metal)
- Awl to poke holes in your fabric for easier snap placement
How to Install plastic snaps with the press pliers:
- 1. For each snap, you will need two caps, one socket and one stud .
- 2. Make sure your pliers match the size of the snaps you plan to fasten (T5 was install into the snap pliers set).
- 3. Choose your spot to install the snap and stick your awl into your fabric to create a small hole .
- 4. Insert one cap and one socket into the pliers and line up with the hole you made with your awl . Repeat this step with one cap and one stud where you plan to install the other side of your snap .
- 5. Squeeze together a cap+socket AND THEN a cap+stud .
- 6. Once you have each side of your snap installed, the socket and stud will click together! If either side feels loose,simply set the one side of the snap in the pliers again and squeeze .
Package Includes:
- 25 colors plastic snaps, each 10 sets ( size T5 12mm)
- 10 copper snaps
- 40 copper eyelets
- 40 washers
- 40 sets metal snaps. Each 10 set (size: T3 10mm)
- 1 x Snap Press Pliers
- 1 x Screwdriver
- 1 x Awl
- 2 x Base and pressure head of pump eye
- T3 button base and indenter,T5 button base and indenter,T8 button base and indenter
Precautions for Use:
- It is not recommended to use these snaps on thick fabrics .