Note: Ebay no longer allows sellers to list items that are the same but a different size separately!
YOU MUST contact me to check availability before buying!
A New 2 ring Piston kit to fit the Husqvarna 360 models from 1992-2002...( the picture IS the exact piston )....27mm compression height.....made by Wossner - this piston is made with all the new technology available today and in my opinion is superior to the originals! Why?....the new forged pistons are lighter and stronger than the cast ones, plus this one is teflon coated for less friction as well!...includes the piston / rings / pin & clips....
they are made for the following PISTON sizes:
8076DA = 77.94mm - Standard
8076DB = 77.95mm - 1st oversize
8076DC = 77.96mm - 2nd oversize
note: the DA / DB / DC will ALL work with the Stock bore size!
8076D050 = 78.44mm - 3rd oversize
the first 3 pistons are almost all the same size = any 1 of them will work in a STD Bore - the D050 size would require the cylinder to be bored out and re-plated to the correct size for the piston clearance....
Limited to available stock on hand....you must contact me and check stock on the size you need before buying!
....if you need a wrist pin bearing I sell those as well....I also offer all kinds of other Husky & Vintage Bike Stuff......
shipping in the USA will be $8 - other Canada $20 - Other Countries $25 thru the USA Mail
Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....
Naturally - I do all that Wheel Lacing / Engine Rebuilding / Crank rebuilding / Fork and Shock rebuilding myself!
THE BUZZARD DOES NOT OVERCHARGE PEOPLE WITH EXCESS " SHIPPING & HANDLING " CHARGES!
Items are normally sent out in the middle of the week and sometimes later in the week as well
COMBINED SHIPPING:
Multiple purchases are combined for lower shipping cost so you can
spend more $$$ with me and less with the freight companies! - Combined
Shipping based on weight and not on the number of items bought - if you buy more than one item - please wait for me to send an invoice with a combined cost to ship all the items
DOMESTIC SHIPPING: is usually thru the USA Mail or whatever is specified in the ad EXTRA CHARGES MAY APPLY for oversize boxes
SHIPPING TO OTHER COUNTRIES:
Canada, the U.K. & Australia, New Zealand, Italy, Spain, etc., thru
the U.S. Post Office - EXTRA CHARGES MAY APPLY for oversize boxes
RETURNS:
I DO take Returns! if there was a mistake in the order or an error in
the description - I will do everything I can to make it right!
FEEDBACK: I normally leave Feedback after I receive Feedback from you
QUESTIONS?: contact me with any questions about an item or shipping before bidding by using all the usual methods........
Note: Ebay no longer allows sellers to list items that are the same but a different size separately!
YOU MUST contact me to check availability before buying!
A New 2 ring Piston kit to fit the Husqvarna 360 models from 1992-2002...( the picture IS the exact piston )....27mm compression height.....made by Wossner - this piston is made with all the new technology available today and in my opinion is superior to the originals! Why?....the new forged pistons are lighter and stronger than the cast ones, plus this one is teflon coated for less friction as well!...includes the piston / rings / pin & clips....
they are made for the following PISTON sizes:
8076DA = 77.94mm - Standard
8076DB = 77.95mm - 1st oversize
8076DC = 77.96mm - 2nd oversize
note: the DA / DB / DC will ALL work with the Stock bore size!
the first 3 pistons are almost all the same size = any 1 of them will work in a STD Bore - the D050 size would require the cylinder to be bored out and re-plated to the correct size for the piston clearance....
Limited to available stock on hand....you must contact me and check stock on the size you need before buying!
....if you need a wrist pin bearing I sell those as well....I also offer all kinds of other Husky & Vintage Bike Stuff......
shipping in the USA will be $8 - other Canada $20 - Other Countries $25 thru the USA Mail
Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....
Naturally - I do all that Wheel Lacing / Engine Rebuilding / Crank rebuilding / Fork and Shock rebuilding myself!
THE BUZZARD DOES NOT OVERCHARGE PEOPLE WITH EXCESS " SHIPPING & HANDLING " CHARGES!
RETURNS: I DO take Returns! if there was a mistake in the order or an error in the description - I will do everything I can to make it right!
FEEDBACK: I normally leave Feedback after I receive Feedback from you
QUESTIONS?: contact me with any questions about an item or shipping before bidding by using all the usual methods........
they are made for the following PISTON sizes:
8076DA = 77.94mm - Standard
8076DB = 77.95mm - 1st oversize
8076DC = 77.96mm - 2nd oversize note: the DA / DB / DC will ALL work with the Stock bore size!
8076D050 = 78.44mm - 3rd oversize
the first 3 pistons are almost all the same size = any 1 of them will work in a STD Bore - the D050 size would require the cylinder to be bored out and re-plated to the correct size for the piston clearance....
Limited to available stock on hand....you must contact me and check stock on the size you need before buying!
....if you need a wrist pin bearing I sell those as well....I also offer all kinds of other Husky & Vintage Bike Stuff......
shipping in the USA will be $8 - other Canada $20 - Other Countries $25 thru the USA Mail
Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....
Naturally - I do all that Wheel Lacing / Engine Rebuilding / Crank rebuilding / Fork and Shock rebuilding myself!
THE BUZZARD DOES NOT OVERCHARGE PEOPLE WITH EXCESS " SHIPPING & HANDLING " CHARGES!
Items are normally sent out in the middle of the week and sometimes later in the week as well
COMBINED SHIPPING:
Multiple purchases are combined for lower shipping cost so you can
spend more $$$ with me and less with the freight companies! - Combined
Shipping based on weight and not on the number of items bought - if you buy more than one item - please wait for me to send an invoice with a combined cost to ship all the items
DOMESTIC SHIPPING: is usually thru the USA Mail or whatever is specified in the ad EXTRA CHARGES MAY APPLY for oversize boxes
SHIPPING TO OTHER COUNTRIES: Canada, the U.K. & Australia, New Zealand, Italy, Spain, etc., thru the U.S. Post Office - EXTRA CHARGES MAY APPLY for oversize boxesRETURNS: I DO take Returns! if there was a mistake in the order or an error in the description - I will do everything I can to make it right!
FEEDBACK: I normally leave Feedback after I receive Feedback from you
QUESTIONS?: contact me with any questions about an item or shipping before bidding by using all the usual methods........
