TURBOSMART IWG75 150mm Internal Wastegate Actuator (Universal) 10psi 

Product Description:

Turbosmart Upgraded Wastegate Actuators have been developed to provide maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment resulting in improved boost response, throughout the RPM range.

This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm & revisions to the actual springs fitted resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive. 

Upgrading with the same base pressure as factory, you can expect a broader boost & torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. These improvements can be amplified with higher base pressures, however tuning & recalibration is likely required.

Available In:

Twin Port Universal   (UNF) 14psi / 1.0 BAR: TS-0681-6142

Single Port Universal (UNF) 14psi / 1.0 BAR: TS-0681-5142

Single Port Universal (UNF) 10psi / 0.7 BAR: TS-0681-5102

Single Port Universal (UNF) 7psi / 0.5 BAR:   TS-0681-5072

Single Port Universal (M6)   10psi / 0.7 BAR:  TS-0681-4102

Features:

Proprietary Silicon Nomex Diaphragm

Choice of Springs from 3psi to 26psi (Optional)

High Grade Billet Aluminum Construction

Stainless Steel Rods and Clevis

Turbosmart Unique Locking Collar System


This is a Universal Single Port IWG75 Actuator supplied with a 150mm long 1/4 UNF thread for fitment on a wide variety of turbochargers. Some fabrication is likely required, including additional hardware such as clevis and brackets.

SUPPLED WITH:

IWG75 Wastegate Actuator

Springs Pre-Fitted as per Description

Required Fasteners & Swivel Hose Barb

Manufacturer: Turbosmart


This Item is a brand new in the box product. It is made from the highest quality materials and made to the highest standards.

TURBOSMART WARRANTY/RETURNS POLICY:

ONE YEAR LIMITED WARRANTY!

The Turbosmart brand is built on innovation and a passion for engineering and winning. It’s no coincidence our tagline is Engineered to Win! While we provide a warranty, it’s important to know what we do to make sure we don’t let customers down in the first place. Every one of our products shipped from our head office in Sydney is hand-tested by one of our trained technicians before it is put in a box. Not one in one hundred or even one in ten: Every single one. For some products, that means a simple power-up or cycle, and for others, it means a vacuum or pressure test. This makes sure that by the time it is in a box on the way to you, it will do exactly what we promise it will! With that said, sometimes, things happen, and we will stand by that promise and will make good on our side of the deal as quickly as we can. Here is the ‘fine print’.

Terms of Warranty, Service and Returns are as follows:

Limited Warranty

Turbosmart warrants its products to be free from defects in material and workmanship under normal use and if correctly installed for a period of one year from the date of purchase. If found to be defective, it will be replaced or repaired once returned to us along with dated proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Turbosmart to the extent permitted by law; the foregoing is exclusive and instead of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Turbosmart be liable for special or consequential damages. This warranty is only valid on products purchased from Turbosmart Authorized Dealers.

WHAT can be returned?
Not all items are subject to our standard returns policy. Items that are special order are subject to a return policy outline between JDM Mods NQ and the customer at time of purchase.

Once a product has been test fitted, installed or used it can no longer be returned.

Special order items from overseas or special order will be accepted for return but a 20% restocking fee will be applied 

  1. JDM Mods NQ Returns Policy:
  2. Returns for this product are accepted only due to the product being faulty from a manufacturing issue and will not be accepted for any other reason. 
  3. All returns will be less the original or "Free Freight" cost of the original shipping. Any returns other than a faulty product will also incur a 10% restocking fee. 
 The return period for any of the above is 30 days only. All returned products must be returned in a re-sellable condition and will be thoroughly

 inspected before any sort of refund is issued. Items not meeting this standard will be returned at the BUYERS expense.

THESE TERMS & CONDITIONS ARE FINAL!

All TURBOSMART products are thoroughly inspected and packaged with the greatest care before shipping.

Please note the free shipping of 3-6 business days, I am located in Townsville North QLD, it takes 3 days to Brisbane, 3-6 to NSW, ACT & VIC, 6-10 TAS & SA and 10-14 WA & NT for free freight! Please be aware of that when taking the free freight option which is just standard slow freight.

Express freight is not available for turbos or large bulky items.

International freight is also available in Standard and Express which is calculated by eBay.

ALL OUR FREIGHT IS THROUGH AUSTRALIA POST ONLY.