Large 9 Liters Capacity : The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can reach 9L, which allows you to store more oil and avoid frequent recycling waste oil.
Function : 9L Fluid Evacuator Oil Change Fluid Extractor Tool can extract and engine oil, transmission oil, radiator coolant, water, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles.
Five Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the adapter, the hose can reach the very bottom of the reservoir and suck up every drop of motor oil. Probes: Ø4, Ø6, Ø8,Ø10,and 1pc of Ø4 brass probe,probe length 1M.
Wide Application : This manual oil and hydraulic pump can be used as pump change extractor and liquid transfer pump for most light and heavy vehicles.It is perfect for working on cars in the garage or automobile repair shops.
Instructions:
Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
Remove the vehicle's oil dipstick.
Connect the main suction tube to both the pump inlet and probe.
Raise the handle to its highest limit and pump it fully several time to create a vacuum which will automatically begin to extract the oil/fluid.
Once completed, remove the main suction tube from the pump, pour the oil/fluid into a suitable container and dispose of it in accordance with local authority regulations.
In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows.
Warning:
Don't use gasoline in this item;
To be on the safe side, Do not use this tool to extract or save the dangerous chemicals, poisons, corrosive liquid, alkaline liquid and solvent. Don't use this tool to extract, absorb or save petroleum or other flammable liquids. unfair processing tools such as don't throw away do not dismount tool, modified, or transform in any purpose, is limited to this function. Don't put the products and pipe in high temperature, snow and rain, direct sunlight place and so on. must drain fluid and clean after each use .
