2. Please check if your spektrum transmitter supports DSM2 protocol, If not, please do not buy, thanks for your understanding.
Specification:
· 100% Brand new and high qulity
· Type: Race receiver
· Number of Channels: 3
· Modulation: DSM2
· Band: 2.4GHz
· Size: As the picture show
· Voltage Range: 3.5–9.6V
Binding:
· With the receiver off, insert the Bind plug into the Batt/Bind port in the receiver.
· Power the receiver. The amber LED will flash continuously, indicating the receiver is in Bind mode.
· Turn on the transmitter and make sure the transmitter shows the desired model number that you intend to use.
· Press the rolling selector to access the List screen.
· Rotate the roller to highlight the Bind screen and press the roller to access this screen.
· Rotate the roller to highlight BIND.
· With the steering wheel, throttle stick and Aux channel (if applicable) in the desired preset failsafe positions,
· press the roller to initiate the bind process and to store the failsafe positions.
· BIND will flash for a few seconds, then the transmitter will beep indicating the process is complete.
· The LED on the receiver should now be solid indicating a successful bind has taken place.
· Remove the bind plug and store it in a convenient place.
Package Included:
· 1x DSM2 Compatible 3CH Surface Receiver
· 1x Bind Plug
Note:
· Due to the hand measurement, there have size error about 1-5mm
· Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same