Feature:
1. Wireless signals can pass through wall, floor and door, easy and convenient to install.
2. The output mode/working mode can be ced at will, easy to match the transmitter.
3. Used in electric doors, , lifting equipment, gateways, elevators, industrial control and security industries and other fields.
4. Made of high‑quality material plastic PCB, sturdy and durable, have a long service time.
5. Small in size and light in weight, convenient to carry and use at any time, very convenient and practical.
Specification:
Item Type: Remote Control Relay Switch
Material: PCB
Battery Model: 23A (delivered without battery)
Remote Control Distance: Approx. 1000meters / 3280.8ft
Working Frequency: 315MHZ/433MHZ (default 315MHZ)
Working Mode: Jog M4/self-locking T4/interlocking L4/jogging and self-locking coexist
Pairing Method: Intelligent learning type
Working Environment: -40-80 degrees
Receiving Sensitivity: ≥105dBm
Output Current Inductive ≤3.5A: resistive ≤6A
How to Use:
The receiver has the following 9 working modes can be set, 8 channels all inching, 8 channels all self-locking, 8 channels all interlocking, separate several channels of jog and self-locking interlocking coexist. 1. Jog: Insert the black jumper on the receiver on the two pins A+L, which means all 8 channels are jog.
2. Self-locking: Insert the black jumper on the receiver into the two pins B+L, which means all 8 channels are self-locking.
3. Interlock: the three pins of the black jumper A, B, and C on the receiver, that is, all 8 channels are interlocked.
4. 1-4 channels jog. 5-8 channels self-locking: insert the black jumper on the receiver into the two pins of C+L.
5. 1-4 self-locking. 5-8 interlocking: insert the black jumper on the receiver into the two pins A+L and B+L.
6. 1-4 way jog. 5-5 way interlock: insert the black jumper on the receiver into the two pins B+L and C+L.
7. 1-2 way jog. 3-6 way self-locking. 7-8 way interlocking: insert the black jumper on the receiver on the two pins A+L and C+L.
8. 1-2 way jog. 3-6 way self-locking. 7-8 way interlocking: insert the black jumper on the receiver into the two pins A+L and B+L and C+L. can.
9. If the remote control is replaced with 16 keys, the 1-15 keys of the remote control each correspond to a relay, and the 16th key is the total key function by default.
Add or the remote control instructions
1. Learning: Press the learning button on the receiving board once the green light is on and release it, then long press any key on the remote control to learn, the green light
After the light flashes quickly, it indicates that the learning of all keys of the remote control is automatically completed, and the remote control can control operations.
2. The 2262, 2260, 1527 chip equivalent frequency fixed learning wireless remote control that can learn more than 20 different address codes;
3. Clear : long press the key switch for more than 5 seconds, the green light will flash and then go out, indicating that the clear is successful.
Package List:
1 x
Remote Control Relay Switch
1 x Remote Control Relay Switch Board
Note:
1. Do not use over load
2. Do not use over pressure
3. Do not use over current