MOCAL GENUINO 13/16UNF PLACA DE TOMA DE SALIDA LATERAL Y ACCESORIOS
Motores con filtros de aceite giratorios de metal solamente
ADECUADO PARA:
Rover Motor de la serie K
Rover V8 (anterior a SD1)
No apto para elementos de papel/filtros de aceite de cartucho
Esta es una nueva placa de extracción de filtro de aceite remoto Mocal para usar con Mocal filcabezales de ter/mangueras. Ideal para filtros de aceite difíciles de alcanzar o inaccesibles, trasplantes de motores, etc.
ENFRIADORES DE ACEITE/KIT DE MONTAJE Y LA GAMA MOCAL COMPLETA DISPONIBLE PARA TODAS LAS MARCAS Y MODELOS - VEA NUESTROS ARTÍCULOS DE LA TIENDA
ESPECIFICACIONES:
Rosca filtro aceite 13/16unf
1/2 cucharada manguera guarniciones
60 mm de alto
Tenga en cuenta: Este artículo es una placa de desmontaje para permitir la instalación de un enfriador de aceite. No es un enfriador de aceite/intercambiador de calor en sí mismo, ni es un reemplazo directo de los intercambiadores de calor del equipo original que están instalados en una ubicación similar (entre el motor y el filtro de aceite)
Diseñado para uso en deportes de motor. No se incluyen instrucciones. (Se incluyen algunos consejos de montaje y pares de apriete)
La imagen muestra lo que recibirá si compra este artículo.
INFORMACIÓN IMPORTANTE:
La mayoría de nuestros listados tienen varias opciones de envío: seleccione el servicio que necesita ANTES de comprar. Si ha seleccionado un servicio postal con un número de seguimiento, se cargará uno en eBay al final de la jornada laboral.
Preguntas: Nos complace hacer todo lo posible para responder preguntas sensatas y genuinas durante nuestro horario normal de oficina (de lunes a viernes de 09:30 a 17:30), sin embargo, tenga en cuenta que no tenemos un conocimiento profundo de todas las marcas y modelos ni tenemos experiencia personal de instalación/uso de todos nuestros productos. ¡Los productos solo se ajustan a los modelos indicados (si los productos se ajustan a otros modelos, está a nuestro favor decirlo)! Los productos enumerados como accesorios universales no están diseñados para ningún modelo. Los modelos sugeridos son apropiados para el producto enumerado, pero verifique las especificaciones/tamaños donde se indica; comprenda lo que está comprando antes de comprar. Espere 24 horas para que respondamos a su pregunta, si han transcurrido más de 24 horas, contáctenos nuevamente
Realimentación: Sea razonable: no nos gusta dar ni recibir nada más que comentarios positivos. Si tiene un problema con su pedido, comuníquese con nosotros y dénos la oportunidad de corregir la situación. Los errores ocurren, no a menudo, pero ocurren.
Sobre todo, queremos que tenga una experiencia de compra positiva y que vuelva a comprarnos.
Performance Part | Yes |
Outlet Diameter | 1/2bsp |
Item Height | 60mm |
Reference OE/OEM Number | n/a |
Type | Take Off Plate |
Items Included | O-Ring |
Items Included | Seal |
Items Included | Take Off Plate |
Items Included | Fittings |
Material | Aluminium |
Material | Steel |
Manufacturer Part Number | TOP01C |
Country/Region of Manufacture | United Kingdom |
Mounting Style | Screw-On |
Finish | Matte |
Interchange Part Number | n/a |
Manufacturer Warranty | 1 Year |
EAN | n/a |
Inlet Diameter | 1/2bsp |
Universal Fitment | Yes |
End Fitting Type | Female Threaded |
End Fitting Type | Male Threaded |
Classic Part | No |
Superseded Part Number | n/a |
Brand | Mocal |
Features | Durability Tested |
Features | No Drilling or Modifications Needed for Installation |
GENUINE MOCAL 13/16UNF SIDE EXIT TAKE OFF PLATE & FITTINGS
Engines with metal spin on oil filters only
SUITABLE FOR:
Rover K Series Engine
Rover V8 (Pre SD1)
Not suitable for paper element/cartridge oil filters
This a brand new Mocal remote oil filter take off plate for use with Mocal filter heads/hoses. Ideal for hard to reach or inaccessible oil filters, engine transplants etc
OIL COOLERS/FITTING KITS AND THE FULL MOCAL RANGE AVAILABLE FOR ALL MAKES & MODELS - PLEASE SEE OUR SHOP ITEMS
SPEC:
13/16unf oil filter thread
1/2bsp hose fittings
60mm high
Please Note: This item is a take off plate to allow the fitting of an oil cooler. It is not an oil cooler/heat exchange itself, nor is it a direct replacement for original equipment heat exchangers that are fitted in a similar location (between the engine & oil filter)
Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included)
icture shows what you will receive if you purchase this item
IMPORTANT INFORMATION:
Most of our listings have a number of postage options - please select the service you require BEFORE purchase. If you have selected a postage service with a tracking number, one will be uploaded to eBay at the end of the working day
Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated - please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question, if more than 24 hours has elapsed please contact us again
Feedback: Please be reasonable - we do not like to give or receive anything but positive feedback. If you have a problem with your order please contact us and give us the opportunity to rectify the situation - mistakes do happen, not often but they do happen
Above all we want you to have a positive buying experience and purchase from us again