5MHz Arbitrary Waveform Dual Channel DDS Function Signal Generator and 2.4"LCD
Introduction:
- The instrument uses a large-scale high-speed FPGA + ARM microprocessor, display with 2.4-inch TFT color LCD display. The instrument has dual DDS signal output waveform output has sine, square, triangle, pulse, linear frequency sweep, logarithmic frequency scanning signal generating function, and can achieve arbitrary waveform generation function of the signal.
- The highest frequency sinusoidal signal to 20MHz, frequency resolution up 10uHz. In addition TTL sync input waveform output and SYNC is the same terminal, take advantage of this feature allows multiple signal generator phase synchronization, enabling multi-channel signal generator functions.
- The instrument has a frequency measurement, period measurement, positive pulse, negative pulse width measurement and counting functions.This instrument is an electronics engineer, electronics laboratories, production lines and teaching, research and the ideal test, measurement equipment.
Features:
- direct digital synthesis (DDS) technology , FPGA design , ultra-low power consumption ;
- 2. uses a single
- , if the user has moved the power ,
- but also to facilitate the achievement of field work ;
- 3. square wave, pulse wave , triangle wave output frequency is
- ;
- 4 contains an internal precision attenuator circuit, makes the small-signal output more accurate ;
- 5. with an arbitrary starting point, the end of the frequency setting , linear and logarithmic sweep sweep function ;
- 6. has a frequency measurement, period measurement ,
- pulse width measurement and counting positive and negative features ;
- 7. has a control function, the number of output pulses can be controlled
- by the output pulses of 1 to 1,048,575 according to the setting function
- 8. All parametric equalizer can be done by an internal calibration procedure ;
- 9. interface using interactive menus , support Chinese and English language options ,
- 10. chassis compact design, easy to carry , comfortable and flexible key operation .
- 11. can communicate with the PC , use the PC to control the instrument ,
- and has the ability to edit arbitrary waveforms on a PC to download to the instrument output waveform.
We provide 2 x Signal Output Cable
Parameters:
Waveform characteristics :
Waveforms: sine, square , triangle , pulse , TTL wave, any wave
Sine Wave Distortion : 0.3% (20Hz ~ 20KHz)
Square wave rise and fall time : <20ns
Frequency characteristics :
Frequency range : 0 ~ 5MHz
Resolution : 10uHz
Frequency error : ± 5 × 10-6
Frequency stability : ± 1 × 10-6
Amplitude characteristics :
Output impedance : 50Ω ± 10%
Amplitude Range : 10mVp-p ~ 20Vp-p
Amplitude resolution : 10mV
Amplitude Stability : ± 0.5% (5 HOURS )
Amplitude errors : (± 1% +20 mV) ( frequency 1KHz, 20 Vp-p)
The duty cycle of the square wave :
Range: 0.1% to +99.9 %
Resolution: 0.1%
Phase characteristics :
Range : 0 ~ 360deg
Resolution : 1deg
Sweep features:
Sweep range : 10mHz ~ 10MHz
Scan time : 1S ~ 99S
Scanning mode: linear sweep , logarithmic sweep
Frequency / Counter technical indicators :
Frequency Measuring Range : 1Hz ~ 60MHz
Minimum input voltage : 0.5Vp-p
The maximum allowable input voltage : 20 Vp-p
Counting capacity: 10 ( 10 hex )
Count : Manual
Interface: USB interface .
Machine weight: about 0.45kg
Total weight: about 0.75kg