Twin O2 Sensor FOR Honda Scooters & Motorcycles
FIT THE FOLLOWING HONDA MODELS ONLY
CBR600RR 2003 - 2006 | ST1300 PAN EUROPEAN 2000 - 2015 |
VFR800 F / VTEC 2000 - 2015 | VT400 2009 – 2016 |
VT750 C / F 2007 - 2017 | VTX1800 N / S / T 2002 - 2008 |
* Please check compatibility before purchase
What is an O2 Sensor FOR
Motorcycle oxygen sensors are a crucial element to the fuel system of a fuel injected bike. The O2 sensors work in conjunction with the ECU to deliver the correct amount of fuel to run the bike at its full potential. Oxygen sensors on motorcycles measure the amount of oxygen in the exhaust and sends that information to the ECU so that it can determine the correct air-fuel ratio according to predetermined mappings. When a sensor becomes faulty, it can throw off the ECU and the wrong air-fuel mixtures will be sent. This will cause your bike to run roughly and could potentially be harmful.
We recommend you to replace the sensor from the manufacturer of your bike if your current sensor is defective, but we understand this is not always possible or practical
This aftermarket motorcycle oxygen sensor will provide the correct readings to ensure that your bike is running at its best.
Features & Description
- Sensortek O2 Sensors are equipped with original matching HONDA connectors so no cutting or splicing is required
- Sensortek O2 Sensors work by simulating and sending back to the ecu a healthy working O2 sensor signal which is requires otherwise you will see engine lights and engine codes appear.
- Sensortek O2 Sensor eliminators work with standard exhausts, aftermarket exhausts and even faulty 02 sensors.
- Sensortek O2 Sensors can work with genuine exhaust systems as well as any aftermarket system which doesn’t have any locations to put the O2 sensor.
- This devices can be installed literally by everyone without extra cost. Installation is a breeze and only takes several minutes to install. locate your O2 Sensor plug and after unplugging it install our SensorTek O2 eliminator then you’re done.
- No more annoying engine lights or faults codes. Please note if any codes are present they must be scanned and cleared first
- Fully tested and ready to use
- Covered with lifetime warranty
- Made from highest quality components approved for automotive applications
- After sale support : e-mail
- 30 days money back Guarantee
Easy
Plug&Play
High
Quality
Lifetime
Warranty
Package Content
- 2 x HONDA O2 Sensor Eliminators
O2 Sensor Installation
- 1Turn off the ignition
- 2Locate the Oxygen sensor in your exhaust, disconnect the old sensor and replace it with this eliminator
- 3Turn the ignition on
Legal Notice
This O2 Sensor is not a factory equipment of HONDA and should only be used as a short term temporary resolution until you replace the original O2 sensor. It is buyer's responsibility to inform any riders of your bike of the precautions they need to follow
Be aware that under no circumstances, shall the seller be held liable for direct, indirect, incidental, special or consequential damages to any equipment and/or for personal injury/death.