With ANCEL S3000 EVAP smoke machine, you can greatly reduce the troubleshooting duration for vacuum leaks and other problems.

Smoke coming out of the electrical or engine components is always a bad sign, especially when it’s detected in your car, as there're lots of components in a car system, it is very difficult to accurately diagnose the root cause of the problem, There’s nothing more frustrating than trying to track down a pesky vacuum leak without the right tools. You don’t want to spend a ton of money on a mechanic. thus, ANCEL S3000 Automotive Smoke Machine is one of the most useful diagnostic tools you must have to detect the leaks.

Whether it’s for the auto repair business or a car owner, the cost of labor, increasing complexity of vehicles and limited access to many components, all these made ANCEL S3000 car smoke machine automotive more important and cost-effective than ever.

What ANCEL S3000 EVAP Smoke Machine Leak Tester Can Do for You?

Full system diagnostics, don't miss any leaks !

✔️Built-in Air Pump Saves Time and Money: ANCEL S3000 smoke machine automotive comes with tons of accessories that allow you to use it on just about any vehicle, unlike other EVAP smoke machines that you’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, ANCEL S3000 smoke machine automotive already has that feature built-in. So you’re saving some extra money!

✔️ Dual Testing Model:ANCEL S3000 EVAP smoke machine come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely.

✔️Instant Smoke Generation: Press Smoke Control switch, the LED Indication would turn GREEN, and the car smoke tester start to generate smoke within seconds. One of the biggest hassles with the automotive smoke machines is the time of heating of the device. You won’t have to wait for the tester to warm up with ANCEL S3000 smoke machine automotive.

✔️ Overload Protection:ANCEL S3000 automotive smoke machine leak detector has built in self-protective system:Overheat and Anti-frost Protection. When the temperature of the device exceeds 120℃, power protection will be intelligently activated to turn it off. The device can also work normally at -20℃. You don’t have to worry about switching on and off the machine constantly during diagnosis. The system takes care of the load for you.

✔️ Wide Compatibility: ANCEL S3000 smoke machine automotive used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. The smoke machine automotive is suitable for all makes and models of cars.

✔️Various System Test: Crankcase System Test; Intake System Test; Car Sealing Test; Fuel Tank System Test; Turbo System Test; EVAP System Test; Ex-haust System Test; Various Pipe Fittings Test. (Note: Not applicable to air conditioning system piping, Lamp housing) It can quick to find evap leaks.

✔️ Save Money by Using Baby Oil or Mineral Oil: You don't need to buy expensive smoke oil. Use baby oil, Pure #5 white oil is the best choice if available. This makes ANCEL S3000 smoke machine automotive practically free to use forever!

✔️Easy To Use:The Smoke Machine Automotive with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system, dramatically reducing diagnostic time.

ANCEL S3000 Automotive Smoke Machine Leak Status Indication

Quick vehicle leak diagnosis by pressure display

NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.

Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.

Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.

ANCEL S3000 EVAP smoke machine not only have an adjustable flow meter for both air and smoke, but it also has a built-in pressure gauge to help with your troubleshooting. It comes with everything you need to test fuel tanks, EVAP systems, Ex-haust systems, turbo leaks, and more!

• Oil Refill Port:For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.
• Velcro Strap For collection of the smoke delivery hose, and power cord before storage.
• Pressure Gauge:Displays the output pressure of the machine or show the real time pressure of the system been testing.
• Air Flow Meter: Provide a quick visual indication of the amount of air/smoke passing through the system being tested.
• Flow Dial: Easy to control the smoke and air amount, determine the exact location of the leak easily and quickly
• Oil Level Gauge: Allow you to accurately control the test oil volume.
• Smoke Control: After pressing this switch, the power indicator light is on to indicate that the power supply is normal.
• Air Control:Press the AIR MODE, pump starts working, only after this, you may press and start the SMOKE MODE.

How to Use the Automotive Fuel Smoke Leak Detector with EVAP System

Notice before Leak Test: Turn OFF the Ignition of Your Vehicle

Detailed Operations.

• Assemble the smoke machine with delivery hose, power socket and hook.
• Unscrew the oil filler cap and add test oil.(Pure #5 white oil is the best choice if available)
• Disconnect the pipes that need to be connected with the smoke leak detector.
• Connect your car smoke machine’s power cord to 12V vehicle battery (red clip to battery positive and black clip to a good ground, then the Power LED would be ON, if else check the power supply)
• Introduce the smoke delivery hose into the pipeline to be tested via the Adapter Cone.
• Press Air Control Switch, wait for seconds until the system is pressurized, check the Pressure Gauge & Flow Meter reading for leak status. Turn on the smoke generator, adjust the smoke amount to suitable amount so you can locate the leak position quickly.
• The leak can be judged according to where the smoke appears.

 Smoke Oil 
 The equipment is compatible withmineral oil based baby oil like Johnson & Johnson Pink bottle. Pure #5 white oil is the best choice if available. (This product does not contain oil.)

Generic Operation 
1. Turn OFF the ignition of the vehicle. LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
 2. Dismantle the air filter and the throttle connections. 
3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake Adapter into the opening. 
4. Connect the Power Cord to 12V vehicle battery. 
5. Now the Power LED would be ON, if else check the power supply. 
6. Introduce the smoke nozzle into the system via the Adapter Cone. 
7. Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter.
8. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle. 
9. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist. 
10. After test, press Smoke Control Switch again to stop the unit from generating smoke and press Air Control Switch to stop generating pressurized air. 
11. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.

Warning 
1. Only Authorized operator could use this equipment. 
2. Always confirm Fluid level before use, if the fluid level is low enough to the bottom of the filler port, it will need a refill. 
3. Do NOT use the unit on smoke sensitive parts. Eg. Lamp housing.
4. Avoid using the equipment on windy environment. 

Safety 
1. Do not use the equipment while the engine’s running. 
2. Wear Protection Glass. 
3. It is always best to test in a draft free area. Always use a bright halogen lamp to enhance the visibility of the smoke exiting the leak. 

Smoke Oil The equipment is compatible with mineral oil based baby oil like Johnson&Johnson Pink bottle. Pure #5 white oil is the best choice if available.

Complete Components Included in ANCEL S3000 Automotive Smoke Machine

ANCEL S3000 Packing Lists

1xPower Cord: To offffer connection from the unit to the automobile battery, in order to drive the unit.

1xFunnel: Assistance method for smoke oil refifill, to prevent pour oil to the unit surface.

1xHook up: To hang the somke machine in the car

1xUser Manual: Detailed descriptions about how to use the smoke machine automotive.

1xIntake Bladder: To fifit the intake and Ex-haust , seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape.

1xAdapter Cone: To fifit the intake and Ex-haust , seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation.

1xReplacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder.

1xSmoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.