eBay

Description :

3.5mm female Jack Socket to 3.5mm female Jack Socket
Passive PoE- means that input and output voltage are equal.
CCTV Camera POE Power Over Ethernet Splitter Cables. Our POE cables are supplied in pairs and allow you to send a 2.1mm DC power over Ethernet RJ45 Cable. Our adapters allow you to send Data and Power over one RJ45 Ethernet cable.
Supplied in pairs
2.1 x 5.5mm DC connections (1 plug, 1 socket)
Rj45 connections
Cat6 ethernet cable gigabit compatible suitable for HD cameras 4mp/5mp Please note the cable used to send power over ethernet must be Copper Cable and not the Cheaper CCA (Copper Coated Aluminum) alternative

PoE (Power over Ethernet) is a technology used to safely pass electrical power, along with data, over Ethernet cabling.
Passive power over Ethernet set is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.
Passive power over Ethernet set is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao,Wline, Micronet, Edimax etc
Passive PoE’s range is normally form 30-40 meters/100-130ft (the real distance depends on the power supply, type of cable and powered device)
Male Power connector is 5.5mm (outer diameter) x 2.1mm (inner diameter).

It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
At the far end, we connect the end of the Ethernet cable to the RJ socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them.