Our 10 Litre Rotary evaporators are perfect for removing
unwanted solvents from extracts using evaporation as a gentle way of performing
this task.
Our Rotary evaporator has a motor which is digitally
controlled that works between 0-199rpm this allows you to rotate the
evaporation flask thus leaving a thin film of oil and solvent around the bowl
increasing the surface area and thinning the liquid, allowing it to evaporate quickly
whilst it rotates in the heated water bath.
The Teflon heated water bath has a fully enclosed heater
which has a working range of room temperature up to 100 degrees C this can be
set using the digital LCD controller. The evaporation flask can be lifted
quickly from the water bath which is controlled by a see – saw button the flask
lift range is between 0-150mm.
A vacuum is pulled on the system by adding a rotary vane
pump, you do this by attaching a hose from the pump to the vacuum nozzle found
on the condenser.
Once the pressure has been lowered on the Rotary evaporator
the boiling point is reduced thus retaining the quality of the extract while
still evaporating of the solvent. Cold liquid is then pumped around the
condenser this can be done using a chiller helping the vapor condense back into
a liquid/solvent which is then collected in a 5 litre condensate-collecting
flask found at the bottom of the condenser.
Using our Rotary evaporator is a great way to get clean
Extracts while re-using your solvents your extracts can then be further refined
using our short path distillation equipment.
Specification:
Application:Distillation
Power Source:Electric
Process:Vacuum Distillation
Voltage:220V50HZ
Power(W):60W
Weight:55kg
Dimension(L*W*H): 82.5*74.5*92.5CM
Rotary flask: 10L rotary evaporator
Collection flask:5L
Rotating speed (rpm): 0~120
Water bath power: 3 KW
Warranty: One Year
Sealing: Main PTFE Seal, Oil ring and O ring
Bath Temp control range: Room Temp. ~ 100°C
Vacuum degree: <133Pa
Display: LCD display