The best price for the best products . COLETECH offers faster and better services with less price!
MCWlaser 40W CO2 Laser tube 70cm & Power Supply 40W 110V Engraver Cutter SHK40
Laser Tube Parameter
Feature:
It's universal model and can work with almost all engraving cutting machine/engraver from China.
It can replace any same power or same length CO2 laser tube.
It can be used to power upgrade of laser
It should work with compatible power supply.
Traditional manufacturing technique; To avoid the leakage and spark better.
Be full of the catalyst, increase of service life and power better than common one.
About 2000-3000 hours service life for 40-60W tube,7000-8000 hours service life for 80-180W;
Advantage:
We manufacture the laser tube by ourselves factory.
We are not only selling the CO2 tube, but also provide the technology support for our products.
We provide the solder service for the tube if need, so it will be easily to install.
We can also customize the tube as your special requirements, contact with us if need
If order quantity, we'd like to supply discount.
We also supply all of other parts for laser engraver besides the tube, you may contact with us if you need any help from us.
Packing and insurance:
We have many years experience in shipping the tube and provide professional packing for them.
The default shipping ways is by DHL/TNT/UPS/FEDEX air express if the tube was sent from China.
The delivery time is about 4-5 working days to USA or Western Europe by air express from China.
We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier.
The buyer must report to us and courier within 48 hours if the tube damages. If failed to do so, this will result in rejection on the claims.
The shipping charge we listed is the typical cost to Western Europe, USA and Asia. The other destinations need to be confirmed the exact cost.
Generally we will ship the order within 24-48 hours including weekend after the full payment is cleared.
The airway bill number for on-line tracking will be shown at Ebay. You can track the shipment easily.
Laser power supply parameter
Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value): ≤1ms.
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10~ 40℃), relative humidity ≤85%.
We will resend a new one freely if the tube broken during transit :-)
On Jul 10, 2024 at 04:58:20 PDT, seller added the following information: