StillMate 65L Full Copper 4 x 3 Inch Plates Distillery

Product Information

• This is full copper 4 x 3" modular still with 4 bubble plates colume with dephlegmator and condensor as well as a copper parrot.
• The reason for using a multi-bubble plates colume is to purify the alcohol like multi-time distillation. For detail, the below link will help you to understand the principles.(copy the link and paste into browser)
• https://www.youtube.com/watch?v=M7AL7-44YTc
• In general, it make less sense after 4 plates if you want it run as a pot still. However, we can supply extra still plate modular/bubble tee to add on yourself if you want a better setup.
• The reason for using copper for the distillation colume mainly because
• Copper absorbs sulfur-containing compounds and yeast cells which are produced during fermentation and the presence of which is undesirable in the distilled spirit or essential oil. Sulfur compounds and yeast cells
• smell. Copper keeps the distillate sweet;
• Copper reduces bacterial contamination;
• Copper has excellent heat transfer properties, helpful for both heating and cooling of vapours;
• Copper prevents the production of ethyl carbamate which is a toxic substance formed from cyanides (cyanides are found in the stones of fruits);
• Copper also improves the quality of the final product. If the quality of the mash is not microbiologically perfect, copper will improve the aroma of the final product.
• The reason and advantage to use a helmet is the copper helmet gives more headspace and surface area, which respectively helps prevent any foaming from gumming up the works and increases passive reflux. Passive reflux helps with increasing ABV and giving a more pure final spirit. The angle of the lyne arm coming off of the copper helmet or alembic hat also has an effect on the passive reflux of the system. As a general rule, a downward angle sends more congeners and heavier flavors to the product condenser, whereas an upward angle sends fewer congeners and gives a lighter flavor.
• This still comes with is a 65L digi boiler(240V/3500w/15amp plug) and heavy-duty Copper dome/lid. Also we shall give you free a power regulator or power station which allow you to run this still by a 10 amp plug with power output control. It will take longer time for distillation but it will help you solve the problem to find a 15 amp power supply at home if you don't have one. Anyway, the stepless power output control will give you more flexibility for power control.

Features

• Made of high-quality copper for tee assmbled bubble plates/dephlegmator/condensor/parrot
• 4 x 3" Add-on bubble tee assemble
• Push-in fittings for cooling water in/out
• 65L boiler with 240V/3500w(500w/1000w/2000w combination) heating rate and temperature controlled
• Choice of add-on the helmet as shown in picture
• Heavy-Duty copper lid with 3" tri-clover fittings
• Sight Glass on lid

Packaging

• 4 X 3" Complete full copper Bubble Tee Assemble
• 1 x Copper Dome/lid fit for boiler
• 2 X Dial Thermometer
• 1 X copper dephlegmator
• 1 X copper Condenser
• 1 X copper Parrot Complete Assembly
• 1 X copper Top U Bend
• 1 X 65L boiler with 240V/3500w(500w/1000w/2000w combination) heating rate and temperature controlled
• 1 x Alcoholmeter
• 1 set of cooling water hoses with push-in fittings and valve
• All tri-clover seals and clamps required

Notes

• We shall send the stills by pieces and parts with two parcels, you need to assemble yourself when/after you receive it.
• The valve under the parrot is stainless steel, not copper.

Gallery

Terms & Conditions