input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
please notice:
the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package Included:
1PC*High-voltage Generator DC 3V-6V to 400kV 400000V Boost Step-up Power Module
400KV ( Square )
1. Model Form: MC-CBPG
2. Physical Volume: 40x36.5x8mm
3. Input voltage: 3.7V-6V
4. Current Input: 0.5A-1A
5. Input line length: about 4 cm
6. High pressure type: pulsed DC type
7. Output voltage: about 400KV (please pay attention to safety when it is used)
8. High voltage discharge poles distance: 1.5 cm-2 cm
9. About power supply: recommend 6V and above 2000mAh for best results
Feature:
1. High voltage pulse output current
2. Small size
3. high efficiency
4. Simple peripheral circuits (just need to button and battery)
Application:
1. Scientific experiments
2. Electronic Instruments
3. Ionizer
4. DIY Kit
NOTE:
1. Avoid power on in the absence of load. You must adjust the proper distance for high-voltage terminal before turning on. The more distance from the arc, the higher the input voltage and the battery capacity.
2. It is forbidden to exceed the maximum arc distance power. In the opposite case, Energy can not be released due to high pressure, easily damaged modules.
3. It can not work a long time.
4. Please connect it to the metal after the test to release surplus energy!
5. It is a high pressure arc generator and it is not high temperature arc generator so that it can not ignite paper or cigarette
Package Included:
1PC*DC Arc 3.7V-6V to 400KV High Voltage Pulse Generator Ignition Boost Step up Module