EasyFil PLA - Silver - Formfutura
EasyFil PLA is a high-end? Easy to use? impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behavior and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
Unique features
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behavior and inter-layer adhesion
Good first layer adhesion to several (un) heated print surfaces
Slightly softer than standard PLA resulting in improved strength and impact resistance
Almost odorless processing / printing
Biodegradable
Wide variety of vivid opaque colors
General printing guidelines * Nozzle size:? 0.15mm Layer height:? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230 ° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60 ° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length?: 1.24 g / cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65 / EC REACH directive 1907/2006 / EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products .
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours following payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which implemented Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their training offer by renovating the electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
EasyFil PLA - Silver - Formfutura
EasyFil PLA is a high-end? Easy to use? impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behavior and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
Unique features
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behavior and inter-layer adhesion
Good first layer adhesion to several (un) heated print surfaces
Slightly softer than standard PLA resulting in improved strength and impact resistance
Almost odorless processing / printing
Biodegradable
Wide variety of vivid opaque colors
General printing guidelines * Nozzle size:? 0.15mm Layer height:? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230 ° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60 ° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length?: 1.24 g / cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m Product export information HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65 / EC REACH directive 1907/2006 / EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products .
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours following payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which implemented Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their training offer by renovating the electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
Listing created with Store360