Manual Welding USB HUB Extender Board Mister FPGA IO Board Set Accessories for Terasic DE10-Nano
Description:
Mister-USB Hub Board:
This is an optional add-on USB Hub for convenient USB device connections.
With this board the MiSTer has an extra seven USB ports that fit snugly under the existing chassis.
The USB Bridge seamlessly connects to the DE10-Nano SoC board without any additional wires.
Features:
Upstream micro USB port
7 USB ports.
5V DC connection.
Based on FE2.1 chip
MiSTer IO Board:
The MiSTer IO Board is an optional expansion that plugs on top of the Terasic DE10-Nano SoC.
It adds the following features to the MiSTer Platform:
VGA Connector. Check Analog video output compatibility
3.5mm Audio Jack with TOSLink
3 Buttons
3 Status LEDs
Secondary SD card (for some cores)
FAN for cooling the FPGA
Expansion connector (in the form of USB 3.0 connector, but it's not USB!)
Additional connectors to integrate the MiSTer into cases.
Mister-SDRAM V2.2 board:
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory.
Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM.
So if a core requires precise memory timings, then the onboard DDR3 cannot be used.
All our Extra Slim (XS) SDRAM boards have been checked under a microscope to ensure no solder bridges are present, then each board is tested at 150Mhz for at least half an hour.
Every one of my boards uses the higher quality Winbond chips, high quality KEMET branded capacitors are used on each board.
You can be confident knowing each Extra Slim (XS) v2.2 SDRAM board has been tested for over half an hour at 150MHz using the SDRAM Board Test Service Core .
We also test each with a number of console cores in games to ensure no issues are present.
Feature:
Suitable For Terasic DE10-Nano FPGA Board
Winbond W9825G6KH-6 Chip
KEMET High Quality Capacitors
Tested For Over Half An Hour @ 150MHz
MiSTer IO Board Compatible
MisTer SDRAM V2.5 Board:
This Extra Slim (XS-D) v2.5 board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core.
Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM.
So if a core requires precise memory timings, then the onboard DDR3 cannot be used.Every one of our boards uses the high quality Alliance memory paired.
You can be confident knowing each 128MB SDRAM Extra Slim (XS-D) v2.5 board has been tested for over an hour at 140 MHz .
We have also tested each with the Neo Geo console core, Acorn Archimedes (Archie) core, Game Boy Advance core, Sega Mega CD core and in Neo Geo games which require a 128MB module to play this ensures no issues are present.
Feature:
Suitable For Terasic DE10-Nano FPGA Board
128MB SDRAM Capacity
100% Of The Neo Geo ROM Library Playable
Alliance Memory AS4C32M16SB-7TIN Chips
MiSTer IO Board Compatible
Fully Assembled & Tested
The MiSTer IO Board is an optional expansion that plugs on top of the Terasic DE10-Nano SoC.
It adds the following features to the MiSTer Platform:
VGA Connector. Check Analog video output compatibility
3.5mm Audio Jack with TOSLink
3 Buttons
3 Status LEDs
Secondary SD card (for some cores)
FAN for cooling the FPGA
Expansion connector (in the form of USB 3.0 connector, but it's not USB!)
Additional connectors to integrate the MiSTer into cases.
Specification:
Size: About 11*7.4*2.5cm
Weight: About 45g
Package Option:
1 x Mister-FPGA IO Board Set
Or
1 x MisTer USB Hub v2.1 Board Set
Or
1 x MisTer IO Board
Or
1 x Mister RTC V1.3 Real Time Clock Board for Mister FPGA
Or
1 x Extra slim v2.2 Board (SDRAM XS v2.2)
Or
1 x Mister SDRAM XS-D v2.5 Board for Mister FPG
Or
1 x Mister-FPGA IO Board + Fan Set
Or
1 x Mister-FPGA 32MB Set
Or
1 x Mister-FPGA 128MB Set
Or
1 x Mister-USB Hub V2.1
Or
1 x Mister-FPGA-IO Board + Fan
Or
1 x Mister-FPGA-IO Board + NOCTUA Fan