Product Description:

Continuous rating of 20 amps at 12V and 40 amps at 6V, momentary rating of 125 amps at 12V and 250 amps at 6V; Spliced to battery cable; For direct power shutoff; Useful during battery charging; Useful when car not in use.

All conductive materials inside the battery cut off switch are brass, and the exterior is made of Zinc alloy. Sleek modern appearance with Face Plate, sturdy and durable.

Switch positioning is not at sloppy or loose, very firm indent at close position.

General models with 100% brand new and high material, ready for replace or plug for old stock, easy to install.

About the item:

• Master Disconnect Switch
• Continuous Amp Rating Of 20 Amps At 12 Volts
• Momentary Rating Of 125 Amps At 12 Volts
• Spliced To Battery Cable
• For Direct Power Shut off
• Useful During Battery Charging
• Useful When Car Not In Use
• Switch Activation: Manual
• Switch Actuation: Rotary (turn)
• Voltage Compatibility: 6V-36V
• Continuous Amp Rating: 20 amps
• Surge Amp Rating: 125 amps
• Material:Zinc alloy

​

Package include:

2 x Battery Disconnect Switch

Installation Procedure:

Step 1:disconnect Battery.

Step 2:determine Negative Cable.

Step 3:choose Suitable Mounting Position For Switch.

Step 4:both Kits Have Cable Terminal Ends Needed To Complete Shut-off Switch Installation.

Step 5:install Switch. Refer To Wiring Diagram Below For Desired Wire Installation. On Cars Equipped With A Body Ground Wire (Example: Late Gm Or Chrysler), Failure To Route This Wire Through The Shut-off Switch Will Result In A Melted Body Ground Strap When The Starter Is Engaged.

Note: Do Not Attach Positive And Negative Cables To Shut[1]off Switch At The Same Time. Battery Explosion May Result.

Step 6:reconnect Battery And Check For Correct Operation.

Note: Be Sure Ignition Switch Is In Off Position Before Turning Shut-off Switch To Off Position To Eliminate Voltage Spikes That Could Damage Ignition Components.