DDX v2 For Creality - Bondtech
Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high performance Dual Drive extruder based on BMG Bondtech Mini Geared.
This model was created to be compatible with the original hotend of every compatible Creality model, except the CR-10S V2 / V3 hotend. It is also compatible with Micro Swiss hotends (Micro Swiss adapter required).
Can users upgrade the hotend to Copperhead? or Mosquito ?.
The DDX will be compatible with most Creality 3D printers of the Ender and CR series. The DDX requires a set of adapters for each model or model set.
To upgrade the hotend, you will need a specific set of adapters.
The DDX has been designed to leave space for connecting the bed probe to the x-carriage. In models where there is no space to connect a bed probe such as BLtouch, to the X carriage, a holder can be printed and attached to the right side of the DDX.
This eXtruder Direct Drive from Bondtech is a high performance and high reliability 1.75mm Dual Drive extruder for Creality 3D printers, based on our popular BMG. Bondtech's unique Dual-Drive technology combined with factory hotend or, for even better performance, industry leading Copperhead hotends? or Mosquito? by SliceEngineering offer a direct drive extruder with hassle-free material feeding and allows the use of a wider range of materials. Housing parts are molded with PA12 (polyamide) for maximum strength and precision using industry-grade SLS technology.
Bondtech DDX Direct Drive eXtruder for Creality is designed to offer the user more options - different materials; higher flow and / or wider nozzles; thinner layers and achieve superior print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. DDX housing design provides effective Hot-End cooling. With the 3: 1 transmission ratio, you can achieve high resolution prints with small nozzles or high flow prints with larger nozzles.
For ease of installation, the kit is fixed to the trolley with only 2 screws.
The product includes:
1x DDX extruder
1x Nema17 Pancake Stepper Motor
1x knurled screw assembly
1x 70cm Stepper Motor Extension Cable
1x 60cm PTFE tube
1x 7cm Capricorn tube
4x zip ties
3 M3x12mm screws
2x M3x20mm screws
1x M3x10mm button head screw
For technical specifications, please visit the support page dedicated to Bondtech products: https://support.bondtech.se
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours following payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which implemented Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their training offer by renovating the electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
DDX v2 For Creality - Bondtech
Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high performance Dual Drive extruder based on BMG Bondtech Mini Geared.
This model was created to be compatible with the original hotend of every compatible Creality model, except the CR-10S V2 / V3 hotend. It is also compatible with Micro Swiss hotends (Micro Swiss adapter required).
Can users upgrade the hotend to Copperhead? or Mosquito ?.
The DDX will be compatible with most Creality 3D printers of the Ender and CR series. The DDX requires a set of adapters for each model or model set.
To upgrade the hotend, you will need a specific set of adapters.
The DDX has been designed to leave space for connecting the bed probe to the x-carriage. In models where there is no space to connect a bed probe such as BLtouch, to the X carriage, a holder can be printed and attached to the right side of the DDX.
This eXtruder Direct Drive from Bondtech is a high performance and high reliability 1.75mm Dual Drive extruder for Creality 3D printers, based on our popular BMG. Bondtech's unique Dual-Drive technology combined with factory hotend or, for even better performance, industry leading Copperhead hotends? or Mosquito? by SliceEngineering offer a direct drive extruder with hassle-free material feeding and allows the use of a wider range of materials. Housing parts are molded with PA12 (polyamide) for maximum strength and precision using industry-grade SLS technology.
Bondtech DDX Direct Drive eXtruder for Creality is designed to offer the user more options - different materials; higher flow and / or wider nozzles; thinner layers and achieve superior print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. DDX housing design provides effective Hot-End cooling. With the 3: 1 transmission ratio, you can achieve high resolution prints with small nozzles or high flow prints with larger nozzles.
For ease of installation, the kit is fixed to the trolley with only 2 screws.
The product includes:
1x DDX extruder
1x Nema17 Pancake Stepper Motor
1x knurled screw assembly
1x 70cm Stepper Motor Extension Cable
1x 60cm PTFE tube
1x 7cm Capricorn tube
4x zip ties
3 M3x12mm screws
2x M3x20mm screws
1x M3x10mm button head screw
For technical specifications, please visit the support page dedicated to Bondtech products: https://support.bondtech.se
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours following payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT COMPLY WITH THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which implemented Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their training offer by renovating the electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portalcquireinretepa.it (MePA).
Listing created with Store360