• Fitment:
    • 1993 MERCEDES-BENZ 300E
    • 1993 MERCEDES-BENZ 300TE
    • 1994-1996 MERCEDES-BENZ C280
    • 1995-1996 MERCEDES-BENZ C36 AMG
    • 1995-1997 MERCEDES-BENZ E320
    • 1994-1996 MERCEDES-BENZ S320
    • 1994 MERCEDES-BENZ SL320
     
  • Features:
    • 100% Brand New Mass Air Flow Sensor
    • Directly Plug-in Replacement
    • Made of Supreme Quality materials
    • Easy to install​
    • One year warranty and worry-free service and technical support. 
     
  • Know the MAF Sensor:
  • Mass Air Flow Meter Sensor MAF For 1995-1997 Mercedes-Benz E320 Fits 280217500

    Fitment:

    • 1993 MERCEDES-BENZ 300E
    • 1993 MERCEDES-BENZ 300TE
    • 1994-1996 MERCEDES-BENZ C280
    • 1995-1996 MERCEDES-BENZ C36 AMG
    • 1995-1997 MERCEDES-BENZ E320
    • 1994-1996 MERCEDES-BENZ S320
    • 1994 MERCEDES-BENZ SL320

     

    Features:

    • 100% Brand New Mass Air Flow Sensor
    • Directly Plug-in Replacement
    • Made of Supreme Quality materials
    • Easy to install
    • One year warranty and worry-free service and technical support. 

     

    Know the MAF Sensor:

    • A mass airflow sensor, or MAF for short, is found almost exclusively on fuel injected engines. A MAF is an electronic device that runs between your vehicle’s airbox and intake manifold. It measures the amount of air that passes through it, and sends this information to the engine’s computer, or ECU. The ECU takes this information and combines it with air intake temperature data to help determine the proper amount of fuel necessary for an optimal combustion. If your vehicle’s MAF sensor is failing, you will notice rough idling and the vehicle running rich.
    • When a MAF sensor is used in conjunction with an oxygen sensor, the engine's air/fuel ratio can be controlled very accurately. The MAF sensor provides the open-loop controller predicted air flow information (the measured air flow) to the ECU, and the oxygen sensor provides closed-loop feedback in order to make minor corrections to the predicted air mass. 

    Symptoms the MAF Sensor Needs Replacing:

    • Check engine light is on
    • Car lazy on acceleration
    • Rough engine
    • Increased fuel consumption
    • Car runs better when the MAF sensor is disconnected
    • Lack of engine power
    • Engine surge at idle
    • Data diagnostic points to MAF sensor
    • Sensor fails to respond to signal

     

    Know how to Replace the MAF Sensor:

    • Step 1: Disconnect the electrical connector from the mass air flow sensor.Squeeze the tab on the harness side of the electrical connector while firmly pulling on the connector.
    • Step 2: Disconnect the mass air flow sensor. Use a screwdriver to loosen the clamp or screws on each side of the MAF that secure it to the intake pipe and air filter. Once the clamps are removed, you should be able to pull the MAF right out.
    • Step 3: Connect the new mass airflow sensor.The sensor slides into the intake and then is clamped on.
    • Step 4: Reconnect the electrical connector.Reconnect the electrical connector to the new mass airflow sensor by sliding the female side of the connector over the male side that is attached to the sensor. Press firmly until you hear a click that indicates the connector is seated all the way and locked into position.


    Item Specifics
    Brand everpartstorecs
    Other Part Number 221069M
    Interchange Part Number 280217500
    Manufacturer Part Number 10105206
    Type Sensor
    Sensor Type Mass Airflow Sensor (MAF Sensor)
    Manufacturer Warranty 1 Year
    Placement on Vehicle Front
    Fitment Type Direct Replacement
    Vintage Car Part No
    Universal Fitment No
    Items Included Dust Shield
    Features Wireless
    Number of Sensors 1
    Connector Color Black
    Material Plastic
    Terminal Type Mini-Blade
    Mounting Style Bolt-On
    Return Policy 30 Days Free Return
    Shipped country US
    Housing w/o housing
    Reference Part Number 0280217500
    Pin Number 4 pins
    With Housing Yes

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Mass Air Flow Meter Sensor MAF For 1995-1997 Mercedes-Benz E320 Fits 280217500

    Fitment:

    • 1993 MERCEDES-BENZ 300E
    • 1993 MERCEDES-BENZ 300TE
    • 1994-1996 MERCEDES-BENZ C280
    • 1995-1996 MERCEDES-BENZ C36 AMG
    • 1995-1997 MERCEDES-BENZ E320
    • 1994-1996 MERCEDES-BENZ S320
    • 1994 MERCEDES-BENZ SL320

     

    Features:

    • 100% Brand New Mass Air Flow Sensor
    • Directly Plug-in Replacement
    • Made of Supreme Quality materials
    • Easy to install
    • One year warranty and worry-free service and technical support. 

     

    Know the MAF Sensor:

    • A mass airflow sensor, or MAF for short, is found almost exclusively on fuel injected engines. A MAF is an electronic device that runs between your vehicle’s airbox and intake manifold. It measures the amount of air that passes through it, and sends this information to the engine’s computer, or ECU. The ECU takes this information and combines it with air intake temperature data to help determine the proper amount of fuel necessary for an optimal combustion. If your vehicle’s MAF sensor is failing, you will notice rough idling and the vehicle running rich.
    • When a MAF sensor is used in conjunction with an oxygen sensor, the engine's air/fuel ratio can be controlled very accurately. The MAF sensor provides the open-loop controller predicted air flow information (the measured air flow) to the ECU, and the oxygen sensor provides closed-loop feedback in order to make minor corrections to the predicted air mass. 

    Symptoms the MAF Sensor Needs Replacing:

    • Check engine light is on
    • Car lazy on acceleration
    • Rough engine
    • Increased fuel consumption
    • Car runs better when the MAF sensor is disconnected
    • Lack of engine power
    • Engine surge at idle
    • Data diagnostic points to MAF sensor
    • Sensor fails to respond to signal

     

    Know how to Replace the MAF Sensor:

    • Step 1: Disconnect the electrical connector from the mass air flow sensor.Squeeze the tab on the harness side of the electrical connector while firmly pulling on the connector.
    • Step 2: Disconnect the mass air flow sensor. Use a screwdriver to loosen the clamp or screws on each side of the MAF that secure it to the intake pipe and air filter. Once the clamps are removed, you should be able to pull the MAF right out.
    • Step 3: Connect the new mass airflow sensor.The sensor slides into the intake and then is clamped on.
    • Step 4: Reconnect the electrical connector.Reconnect the electrical connector to the new mass airflow sensor by sliding the female side of the connector over the male side that is attached to the sensor. Press firmly until you hear a click that indicates the connector is seated all the way and locked into position.



    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.