1. Clean well with alcohol and dry the surface (it must be smooth)
1. Clean and dry the surface well (should be smooth)
2. Before application, you need to make the transparent film adhere as best as possible to the sticker, pressing with a soft paddle, a folded cloth or simply with your fingers, over the entire surface of the sticker.
2.Before applying, you have to do to join the better the transparent film (which is above the adhesive pre-spaced) to the adhesive itself, pressing with a shovel or with to soft cloth folded on the whole surface of the adhesive.
3. Gently pull the transparent film and check that all the pre-spaced sticker has detached from the white paper (which is under the sticker).
3. Gently remove the plastic wrap and check that everything is pre-spaced adhesive is disconnected from the white papers (which is under the sticker).
4. Keep the transparent film with the adhesive taut attached, place it on the affected surface, then spread it, pressing well with a soft spatula or with a folded cloth.
4. Hold taut plastic wrap with the adhesive attached while placing the area concerned, then spread it with a spatula, pressing down with to soft clothor folded.
5. Once adhered to the surface, just remove the transparent film.
5. Ounces adhered to the surface only pull away the plastic wrap.
6. The pre-spaced adhesive remains on the surface and we are done.
6. The pre-spaced adhesive remains on the surface and we ended.