-Higher Brightness: Combo beam with Dual row and nest reflector cup design in the middle for extreme light efficiency. Full die-cast aluminum profile,wear & corrosion resistant enough to withstand any harsh environment.
-FLOOD & SPOT COMBO BEAM: Spot beam for long irradiation distance,flood beam for bright and broad view area. The combo beam provides an excellent visual effect for you,offering a long distance irradiation and wider view.
-HIGH PERFORMANCE: IP67 Waterproof Rate, Efficient Cooling, Die-cast Aluminum Alloy Housing, Over 50,000 Hours Lifespan , Dust-tight and Shockproof, with a Rugged Breather to drain off most mist, moisture and drops by pressure difference.
-Adjustable mounting bracket: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction of light beam easier. The lamp can be slid after install the accessory. Wide application: The work light can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden lighting, backyard lighting, back-up light, off road lighting, construction lighting and so on.
Package Included:
1x 240W Led Work Light Bar (Spot Flood beam & 5D Dual Row)
2x 4inch 60W Led Cube Pods
1x Wiring Harness With Rocker Switch
Mounting Brackets
1x 240W Led Work Light Bar (Spot Flood beam & 5D Dual Row)
2x 4inch 60W Led Cube Pods
1x Wiring Harness With Rocker Switch
Mounting Brackets
The work light can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, UTVS,Cars, Boats, etc.
Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
5 Year Warranty
versatile(back-up light, front/rear light, fog light, etc), universal (fix almost all vehicles)
Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
5 Year Warranty
versatile(back-up light, front/rear light, fog light, etc), universal (fix almost all vehicles)
Installation:
1. Test the light to make sure it can work properly. (Red line is positive, black line is negative.)
2. Install the hex nuts on the bolts, And twist the spring meson .
3. Make the bolts go through the mounting holes And set into the spring meson, And then tighten the hex nut.
4. Connect the power line to the corresponding power connector.
5. Make sure the light is installed steadily, And then start the power.
1. Test the light to make sure it can work properly. (Red line is positive, black line is negative.)
2. Install the hex nuts on the bolts, And twist the spring meson .
3. Make the bolts go through the mounting holes And set into the spring meson, And then tighten the hex nut.
4. Connect the power line to the corresponding power connector.
5. Make sure the light is installed steadily, And then start the power.
Attention:
To protect your eyes, don't stare at the light pods when turns on.
To protect your eyes, don't stare at the light pods when turns on.