PNB Professional
Nail Boutique 


BASE Hema Free -  This basic coating has a modernized composition and has successfully been tested on allergy sufferers. Therefore, the use of HEMA FREE Base is maximum comfort and safety for clients with any nail plate, and especially for people with hypersensitive nails. Due to the consistency of medium viscosity, the material is well distributed over the surface with minimal effort by the master. As a result, you get a super-durable coating of medium hardness. Rubber HEMA FREE Base 一 is a guarantee of safety for the master and the client.

ADVANTAGES:
  • modernized warehouse;
  • lack of HEMA monomer in the composition;
  • tested on allergy sufferers;
  • super adhesion;
  • flexibility and moderate stiffness;
  • hypoallergenic formula 12 FREE;
  • during polymerization, the exothermic reaction is less pronounced;
  • does not heat up to high temperatures on the nails, does not cause unpleasant sensations during polymerization;
  • suitable for thin, damaged and sensitive nail plate;
  • perfect consistency for straightening nails;
  • a wide range of possibilities: strengthening, restoration, extension of the free edge/corners up to 2 mm in length;
  • ultra-durable coating, without chipping and peeling for up to 28 days.
RECOMMENDATIONS:
  1. for the absence of sensations, the coating thickness should not exceed 1 mm;
  2. when leveling the nail plate, the thickness of the coating should not exceed 1.5 mm for complete polymerization of the product. It is recommended to work in a conveyor way, polymerizing each nail for a few seconds, and at the end 一 complete drying for 1-2 minutes, depending on the type of lamp and power;
  3. the exothermic reaction is more pronounced in the summer at temperatures above 25 degrees. To avoid this, it is desirable to have an air conditioner in the working room;
  4. you can also use Low Heat Mode.

THIN APPLICATION. APPLICATION METHOD:
  • Prepare the nail plate with PNB buff, remove the gloss.
  • Apply the auxiliary liquids: Nail Dehydrator and Bond Control to the entire plate.
  • Apply a very thin layer of HEMA FREE Base PNB, seal the free edge, dry for 60 sec.
  • Apply a thin, even layer. Polymerize in the lamp for 60 seconds. Remove stickiness with PNB Gel Cleanser as needed.
  • Do the coating/design, apply the PNB top.

LEVELING TECHNIQUE. APPLICATION METHOD:
  • Prepare the nail plate with PNB buff, remove the gloss.
  • Apply the auxiliary liquids: Nail Dehydrator and Bond Control to the entire plate.
  • Apply a very thin layer of HEMA FREE Base PNB, seal the free edge, dry for 60 sec.
  • Apply a second very thin layer of HEMA FREE Base PNB, place a drop of base on the highest point of the nail and stretch it evenly to the free edge.
  • Polymerize in the lamp for at least 1.5 minutes.
  • If necessary, remove the sticky layer with Gel Cleanser PNB.
  • Complete the cover design, apply the PNB top.



BASE Crystal -  this is a range of amazing reflective rubber bases that make it easy for the artist to create a spectacular finish. The palette contains luxurious shades with many reflective particles that refract light and create a special shine on the client's nails. The dense and thick texture of the base evens out the surface of the nail, masks its imperfections and guarantees uniform application of gel polish.
ADVANTAGES:
  • Elasticity and plasticity of the material;
  • Savings: base, color and reflective elements in one bottle;
  • High level of adhesion - the best adhesion to the nail plate and the next layer of gel varnish coating;
  • 100% safe hypoallergenic formula 7 free;
  • Pigmentation at the highest level;
  • Perfect application;
  • Instantly self-levels, does not spread;
  • Strengthens the nail plate;
  • No pungent smell;
  • Reduces the time of the wizard by 10-15 minutes.


Base Melt Look - Universal nail art base coating PNB Melt Look ("Melting Effect") allows you to experiment with countless design options, using the technique of painting on wet gel polish!
Clear, colorless, structured consistency of Melt Look Base PNB is developed for designs with different effects:
  • Airy, voluminous watercolor drawings
  • Painting with the effect of natural stone
  • In the style of oil painting.
  • Decor combined with a melting pattern and others
  • To create a colorful masterpiece will help any colored PNB gel polish.
Special colored gel coats are not required for watercolor designs!
Possibilities of "melting" variations of drawings are unlimited: flower motifs, abstraction, animalistic fantasies, combination of drawing techniques on wet and cured covering!
Application: after creating the background of the picture, apply one layer of Melt Look Base (not dry), design and cure for 4 minutes in a UV device / or 2 minutes in an LED lamp. Covered with a layer of fixer, polymerization is performed, the sticky layer is removed. That's it, a unique design with an unmatched "melting" effect is ready!



Base UNIVERSAL - UNIVERSAL BASE GEL PNB is a must-have for a long-lasting manicure that lasts up to 28 days!
It is used to improve adhesion with a wet nail plate. Universal base gives a more effective adhesion to the colored gel polish, and when working with modeling materials.
Promotes incredible adhesion of artificial material and natural nail, prevents detachments.
The universal base is equipped with a comfortable brush with elastic bristles and a smooth cut.
It does not spread and allows you to create a neat uniform layer.
Thanks to UNIVERSAL BASE GEL manicure will be able to effectively resist aggressive environmental factors and preserve the original aesthetics.

MODE OF APPLICATION:
  • First you need to do a manicure, then use a soft buff for natural nails. Remove the remaining dust with a special brush.
  • Next, you need to treat the nail plate with Nail Dehydrator, then apply an acid-free primer Bond Control.
  • The base coat is applied in a thin layer, covering the end of the nail.
  • Сure in an LED lamp for 60 seconds, UV lamps - 2 minutes.
  • Apply a gel-polish or modeling agent PNB.
  • Cover with the top coat PNB. If the top has a sticky layer - remove it with a special tool.
* 7-Free - without formaldehyde, dibutyl phthalate (DBP), camphor, toluene, xylene, methacrylic acid, triphenyl phosphate.



BASE Blur ink - Special nail art base coat for design with watercolor ink drops PNB Blur Ink. Provides beautiful flow of ink droplets over the surface, leaving clear contoured edges. Smooth, translucent transitions are created on the surface of the nails when using several colors of BlurInk watercolor ink drops. Ink pigments penetrate into the base layer, form a watercolor pattern and fix in it. Apply UV / LED Blur Ink Base to the nail prepared for the design. Depending on the creative idea of the master, ink drops can be applied to an undried layer of the base or after its polymerization (LED, UV / LED lamps - 30 seconds). Blur Ink Base has no sticky layer. The 8 ml bottle is designed for 30 - 40 applications, depending on the length of the nails.


BLUR INK COLOR - https://www.ebay.com/itm/194728266702

Features of Blur ink Base:
  • medium density and viscosity
  • does not have a sticky layer
  • intended directly for making designs with watercolor ink
Attention! The special nail art base Blur Ink is not a base coat for gel polish manicure. It is intended directly for making designs with watercolor ink. Before performing the design, it is necessary to carry out a standard treatment of the nail plate, cover it with a colored gel polish or a camouflage base of your choice. Cure in a lamp. And start creating the design.




BASE ExtraPRO - is a professional base for gel varnish, which is a product of advanced rubber coating technologies. Studies in different temperatures and humidity levels have allowed us to obtain an ideal base coat, which allows you to maximize the perfect time for gel-varnish manicure.  Ideal for strengthening, aligning, repairing the nail plate.
ExtraPRO Base allows you to shape depleted, thin nails, grow the edge, even a short nail length. It is easy and quick to dry in UV and ICE lamps.
Features of UV / LED ExtraPro Base PNB:
  • With perfect adhesion
  • Extraplastic
  • No pungent smell
  • Has a thicker, denser consistency
  • Does not spread
  • Self-leveling




BASE Fiber - camouflage base for gel polish allows you to get the effect of porcelain marigolds. Possesses high reinforcing properties. When using it, the nails are protected from brittleness and delamination.
Craftsmen successfully use the Fiber PNB base for the restoration of thin, brittle nails, for modeling the shape, repair and reconstruction, and building up a small edge. The composition of the product contains vitamin E and calcium, which have a strengthening effect, as a result, the growth of healthy strong nails is accelerated. The thick consistency and self-leveling properties make the work with the base comfortable and easy.

Fiber Base PNB Features:
  • creates the effect of porcelain nails
  • contains visible nylon fibers
  • serve as a reinforcing element
  • the natural growth of healthy nails resumes
  • Wearability of the coating at least 21 days



BASE Scotch - revolutionary development of technologists of PNB company. Its uniqueness is that it is completely acid-free and at the same time holds like cement! It took 2 years of testing to develop the database - thousands of happy women with healthy nails and long-term coating without detachments.

MODE OF APPLICATION:
  1. Prepare the nail plate with PNB buff, remove the gloss.
  2. Apply the auxiliary fluids: Nail Dehydrator and Bond Control to the entire plate.
  3. Apply Scotch Base PNB. Polymerization of the material - 90 sec.
  4. Remove the dispersion layer with Nail Prep.
  5. Apply color gel polish in 1-2 coats. Polymerization of the material 60 sec.
  6. Top with PNB top.

RECOMMENDATIONS:
Polymerization time in a 48 watt lamp 90 sec.
When aligning on a thin nail plate, we recommend using the LOW HEAT MODE.
When aligning with a base on a healthy and not thinned nail plate, the release is minimal.
* Technique with Water Based Sticker:
Apply UV / LED Scotch Base PNB on the dried color coating, dry for 4 seconds in a 48 Watt PNB LED lamp. At the 4th second, we take out the hand and apply the sticker evenly, dry it in an LED lamp for 60 seconds. We take out the hand with the design and again make a thin UV / LED Scotch Base PNB overlap, polymerize in the lamp and overlap with the PNB top.




BASE Coat - it is a tool designed to create a gel-varnish manicure on standard nail plates: healthy, unsophisticated and undamaged. The base for gel varnish, which is advisable to buy in most situations, is easy to use, fast polymerization and efficiency. The use of this material provides manicure resistance to various damages for 20 days.

PNB base is used as follows: nail plates should be treated with a dehydrator to ensure maximum adhesion between the nail surface and the base under the gel polish.

Then the base coat is applied in one layer: it is fluid enough to spread completely on the nail plate. Then you need to put your nails under the lamp for one minute. Before applying the gel varnish, you should remove the dispersion layer.



BASE Camouflage - Ideal material for french designs, fashionable nude finishes. Allows you to create a flawless manicure without wasting time and materials. It is pleasant and comfortable to work with her. Does not spread, self-leveling, dries quickly in UV / ICE devices. Strengthens thin and emaciated nails, perfectly camouflages all irregularities and discoloration of the nail plate (darkening, yellowness, spots). High adhesion ensures long-term wear of the coating. The beautiful neutral color of the latte allows you to preserve the delicate look of women's hands. Great for any age and occasion



BASE Titanium 2in1 - the 2-in-1 titanium coating provides the craftsman with the ability to use the product both as a base and as a top.
At the same time, the tool has proven itself perfectly in two different roles. As a base, the product copes with the strengthening of nails by five, provides a high degree of adhesion to the nail plate. The durability of a manicure can be up to 4 weeks.
As a top product, it reliably fixes the color, protects against chips, does not turn yellow, does not crack, and also provides the brightness of the color gel polish and the gloss of the top layer.

Features of Titanium Base / Top Coat 2 in 1:
  • Provides a perfectly flat surface
  • Possesses powerful adhesive properties
  • Protects color from chips and scratches
  • Exposure to UV rays
  • Provides a perfectly long-lasting and vibrant manicure


TOP ART - a fixer for gel polish manicure with a lot of foil particles that resemble crystal shards. Covering with this top will add some extra charm to your look.
It can be combined with different shades of gel polish: from discreet nude to bright and neon. You can put an accent on one nail or cover everything with a top, in both cases your manicure will outshine the beauty of everyone around.

Advantages:
  • Medium viscosity;
  • Contains many silver foil particles;
  • The presence of a UV filter;
  • No residual stickiness after polymerization;
  • Does not create additional volume when applied;
  • Fast solution for stylish designs



TOP Protect Glow - fixer for gel polish without a sticky layer with a UV filter. Gives any gel polish an ultra-gloss sheen and dazzling shine, does not fade during wear. Nails acquire a luxurious shine and glossy smoothness.
Provides full protection of gel polish on nails from chemical and mechanical damage; chips and scratches; wear and tear. Creates a high-quality waterproof layer.

The crystal-transparent texture of the top does not leave a yellowish tint, and UV filters add extra whiteness to the manicure.

Advantages:
  • Elastic, but at the same time durable.
  • Medium density - gently and evenly falls on the nail plate in a thin layer.
  • The brush of optimal shape, made of high quality materials, will allow you to apply the product accurately, without unnecessary smudges.
  • Does not flow beyond the nail plate.
  • Protects against pigment fading for 14 days and will never turn yellow, thanks to the UV filters in the composition.
  • Gives French manicure extra whiteness.
  • It has no residual stickiness after polymerization, which simplifies coating and saves time.
  • It has a good gloss throughout the entire period of wearing a manicure.
  • Contains only safe raw materials according to the 7-free standard



TOP porcelain (milk) - milk top without a sticky layer. "Golden mean" between transparent and milky white top. Translucent, like a washed out shade, reminiscent of skim milk in a glass glass. This top creates a milky veil on a gradient or color without additional overlap.
Recommendations:
If the top has not been used for a long time, then, before use, it is necessary to turn the bottle upside down and roll it between your palms to evenly distribute the pigment.



TOP powder - the gel polish fixer results in a soft cashmere finish. The new finish is created on a rubber basis, the main component is the smallest acrylic powder.
Plastic, thick, elastic, applied in a thin layer, allows you to make the coating matte and more durable.
Features of Powder Top Cashmere effect PNB:
  • Incredibly pleasant to the touch
  • Slightly springy
  • Extraelastic
  • Resistant to chips and scratches
  • The velvety dullness of the top lasts for at least three weeks



TOP Express - the perfect tool to complete a manicure. The final top without a sticky layer, with the effect of "wet shine". It can also be used as a finishing coating for artificial nails.
Thanks to its consistency, it lies on the nail evenly, without creating an additional too thick layer. Ideal for applying Tuesdays.
It is worn for about 21 days, does not crack, is very durable, has additional protection against chips and cracks. Hypoallergenic, does not contain harmful substances, does not have a sharp unpleasant smell, dries quickly.  






Acid Primer - Adhesive acid primer.  Acid preparation, super strong adhesion of any gel preparations or acrylic systems. It pre-prevents exfoliation, deeply degreases, cleans, dehydrates the nail plate, promotes better adhesion of the artificial coating to the keratin structure of the nail plate. Apply a thin layer on degreased nails, let dry for 30 seconds.
PNB special acid nail primer has rightfully become a favorite among professional masters. It contains special acids that dehydrogenate the lipid barrier and eliminate natural oiliness on the nail plate. The acid primer is absorbed immediately after application, leaving no traces. Recommendations for use: Acid Primer is applied in a thin layer to previously degreased nails. Drying time - 30 seconds.
The preparation also includes antiseptic components that eliminate disease-causing bacteria, and vitamins work to strengthen nails. The result of its use is several times increased adhesion indicators of gel polish, acrylic systems with nails. A synthetic brush of a convenient shape allows you to apply the product evenly and without the slightest clogging on the side ridges and cuticle. Properties and storage conditions.
One of the properties of this primer is that its composition begins to become thicker at a temperature of + 16 ° C, and turns into a solid substance at a temperature of + 10 ° C and below.

IMPORTANT - to preserve the properties, it is necessary to allow the acid primer to thaw on its own for several hours at room temperature without accelerating the process by sudden heating, thawing in a warm water bath is also allowed.
To avoid mechanical damage to the brush, be sure to let the product thaw and only then open the bottle. This product does not lose its properties after several "thaw" cycles.




Nail Dehydrator -  Means for preparing nails before applying any systems for modeling or decorating nails.
The product formula helps to balance the pH level of the nail, and also removes the remains of skin fat and impurities from the surface of the natural nail plate, increases the durability and strength of manicure and pedicure.
Technologist's tip: apply before Bond Control acid-free primer.
The PNB nail dehydrator is a novelty that works really well. The drug efficiently and harmlessly neutralizes excess moisture and fat on the nail plate, significantly improves the adhesion of shellac, gel polish and lipid barrier. Nail Dehydrator has a safe formula, does not contain toxic components, and balances the pH level. It is covered with an even layer, is instantly absorbed and does not require time to dry. Its use allows you to extend the perfection of manicure and pedicure. PNB technicians recommend applying a thin layer of dehydrator before using Bond Control acid-free primer.




Bond Control  -  A unique acid-free agent that provides super-strong adhesion of any gel preparations, including gel varnishes.
Prevents exfoliation, promotes a better combination of the artificial coating with the keratin structure of the nail plate.
Technologist's advice: must be used before applying base coats.
The composition of the new primer does not contain harmful acids that cause dryness and brittleness of nails. The priming primer is instantly absorbed and provides excellent adhesion of the gel pigment to the nail plates, thereby increasing the durability of the manicure. Bond Control has a thin, convenient brush that allows you to distribute the drug as evenly as possible on the nails, excluding its flow on the side ridges and cuticle.