Fit For:
  • 1995-2005 CHEVROLET     BLAZER         4WD
  • 1995-2005 CHEVROLET     CAVALIER         
  • 2004-2005 CHEVROLET     CLASSIC         
  • 1997-2003 CHEVROLET     MALIBU         
  • 1995-2004 CHEVROLET     S10         4WD
  • 1999 DODGE     NEON         
  • 1995-2001 GMC     JIMMY         4WD
  • 1995-2004 GMC     SONOMA         
  • 1998-2000 ISUZ...

2 Pcs Front Sway Bar Links Kit For 1998-2004 Nissan Frontier 4WD 3.3L Fits K6600

Fit For:

  • 1995-2005 CHEVROLET     BLAZER         4WD
  • 1995-2005 CHEVROLET     CAVALIER         
  • 2004-2005 CHEVROLET     CLASSIC         
  • 1997-2003 CHEVROLET     MALIBU         
  • 1995-2004 CHEVROLET     S10         4WD
  • 1999 DODGE     NEON         
  • 1995-2001 GMC     JIMMY         4WD
  • 1995-2004 GMC     SONOMA         
  • 1998-2000 ISUZU     HOMBRE         
  • 1998-2004 NISSAN     FRONTIER          4WD
  • 1999-2004 OLDSMOBILE     ALERO         
  • 1996-2001 OLDSMOBILE     BRAVADA         AWD
  • 1997-1999 OLDSMOBILE     CUTLASS         
  • 1999 PLYMOUTH     NEON         
  • 1999-2005 PONTIAC     GRAND AM         
  • 1995-2005 PONTIAC     SUNFIRE

 

Package Includes:

  • 2x K6600    Stabilizer Bar Link Kit

 

Fault judgment:

  • When encountering a limp road, the vibration is strong, and it is shaking up and down, and the body is twisted.
  • When the car is driving, every time it vibrates up and down, the suspension device makes a "guckling" noise
  • If there is a problem with the front wheel suspension system, the direction will deviate to one side, and continuous correction is required to maintain normal driving.

      A normal shock absorber will generate heat when it is working. If it does not generate heat or if oil leaks from the shock absorber, it means that the shock absorber has been damaged. During the inspection, the condition of the shock absorber rubber sleeve should also be checked. If it is found to be damaged, it should be replaced together with the shock absorber in time. In addition, it may be that the fastening bolts are loose.

 

Know how to replace the swag bar link:

  • step 1: Engage the parking brake. Set the parking brake on the vehicle and set the wheel block on one of the tires you will not remove.
  • step 2: After the tire screws are loosened, jack up the jack.
  • step 3: Remove tires. At this time, completely remove the wheel nut, and then remove the tire from the vehicle.
  • step 4: Find the rocker link to be replaced. The anti-roll bar is usually located at the front of the car and is bolted to the suspension of the car.
  • step 5: Remove the lug nut. After removing the top nut, remove the lower nut. After removing the two nuts, pick up the pry bar and apply pressure on the rocker near the connecting rod.
  • step 6: Make sure that the new joystick link matches the old link. Use a pry bar to apply downward pressure on the rocker, and then install the new link to the position of the old link. Make sure that the installation direction is correct, as the two ends look very similar.
  • step 7: After the link is in place, install the nut and tighten it to the appropriate torque specification.
  • step 8: Put the tires back into the vehicle. Tighten the lug nuts as much as possible, but do not over tighten them. Excessive pressure on the car may knock it off the jack bracket.
  • step 9: Tighten the lug nut. After the vehicle returns to the ground, tighten the lug nut to the appropriate torque specification.If you want to change multiple anti-roll bar links, just repeat these steps on the other side.

 

                                                                

Notes:

  1. Please be sure to check carefully whether the part is suitable for your car model before placing an order
  2. If you have any questions after receiving the goods, please contact us in time, we will give you a satisfactory answer

Item Specifics
Brand everpartstorecs
Placement on Vehicle Front
Manufacturer Part Number 10273679
Interchange Part Number K6600
Superseded Part Number Front Driver and Passenger Side Replacement
OE/OEM Part Number Suspension Stabilizer Sway Bars Ends Linkages Assembly
Material Alloy Steel
Vintage Car Part No
Manufacturer Warranty 1 Year
Type Sway Bar
Finish Coated
Features Greasable
Items Included Mounting Hardware
Mounting Style Bolt-On
Color as pictures shown
Universal Fitment No
Custom Bundle Yes
Adjustable Yes
Surface Finish Premium Quality
Quantity 2 Pieces
Greasable or Sealed Greasable
Cross Part Number 22657718, 22710259, 546188B501, 8150245110, 8159967190
Cross Reference Part Number 15024511, 15996719, 22645963, 22650740, 22657717
Bundle Description 2x Front Stabilizer Bar Link Kit
Partlink Number For Chevrolet Blazer Cavalier Classic Malibu S10 GMC Jimmy
Fitment For Oldsmobile Alero Bravada Cutlass Pontiac Grand Am
Fitment 2 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005
Fitment 3 For 2010 2011 2012 2013 2014 Nissan NP300
Fitment 4 For GMC Sonoma Isuzu Hombre Nissan Frontier Sunfire
Feature ESCP

Shipping

1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

 

2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

 

3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

 tell us the new address within 12 hours after payment 

(no delivery to remote areas).

 

4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

 if there are any problems, contact us immediately please.

Payment

PayPal preferred.

 

Other payments accepted by ebay also can be accepted.

Service

1. Products can be returned for no reason within 30 days of receipt

 (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

 

2. If the product does not match the description on the product page, we will exchange or refund the product for free 

within 30 days.

 

3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

Note

If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

 

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

Shop Category
 Store Home
 lift support
 Condenser
 Air Diesel Heater
 Blower Resistor
 Blower Motor
 Heater Core
 Suspension Kits
 Thermostat Housing
 ABS Wheel Speed Sensor
 Window Switch
 Oxygen Sensor
 3Rd Brake Light
 Mass air flow sensor
 AC Compressor
 Cooling Fan
 Towing Mirrors
 Door Handle
 Roof Rack
 Radiator
 Sensor
 Knock Sensor
 Catalytic Converter
 Other

2 Pcs Front Sway Bar Links Kit For 1998-2004 Nissan Frontier 4WD 3.3L Fits K6600

Fit For:

  • 1995-2005 CHEVROLET     BLAZER         4WD
  • 1995-2005 CHEVROLET     CAVALIER         
  • 2004-2005 CHEVROLET     CLASSIC         
  • 1997-2003 CHEVROLET     MALIBU         
  • 1995-2004 CHEVROLET     S10         4WD
  • 1999 DODGE     NEON         
  • 1995-2001 GMC     JIMMY         4WD
  • 1995-2004 GMC     SONOMA         
  • 1998-2000 ISUZU     HOMBRE         
  • 1998-2004 NISSAN     FRONTIER          4WD
  • 1999-2004 OLDSMOBILE     ALERO         
  • 1996-2001 OLDSMOBILE     BRAVADA         AWD
  • 1997-1999 OLDSMOBILE     CUTLASS         
  • 1999 PLYMOUTH     NEON         
  • 1999-2005 PONTIAC     GRAND AM         
  • 1995-2005 PONTIAC     SUNFIRE

 

Package Includes:

  • 2x K6600    Stabilizer Bar Link Kit

 

Fault judgment:

  • When encountering a limp road, the vibration is strong, and it is shaking up and down, and the body is twisted.
  • When the car is driving, every time it vibrates up and down, the suspension device makes a "guckling" noise
  • If there is a problem with the front wheel suspension system, the direction will deviate to one side, and continuous correction is required to maintain normal driving.

      A normal shock absorber will generate heat when it is working. If it does not generate heat or if oil leaks from the shock absorber, it means that the shock absorber has been damaged. During the inspection, the condition of the shock absorber rubber sleeve should also be checked. If it is found to be damaged, it should be replaced together with the shock absorber in time. In addition, it may be that the fastening bolts are loose.

 

Know how to replace the swag bar link:

  • step 1: Engage the parking brake. Set the parking brake on the vehicle and set the wheel block on one of the tires you will not remove.
  • step 2: After the tire screws are loosened, jack up the jack.
  • step 3: Remove tires. At this time, completely remove the wheel nut, and then remove the tire from the vehicle.
  • step 4: Find the rocker link to be replaced. The anti-roll bar is usually located at the front of the car and is bolted to the suspension of the car.
  • step 5: Remove the lug nut. After removing the top nut, remove the lower nut. After removing the two nuts, pick up the pry bar and apply pressure on the rocker near the connecting rod.
  • step 6: Make sure that the new joystick link matches the old link. Use a pry bar to apply downward pressure on the rocker, and then install the new link to the position of the old link. Make sure that the installation direction is correct, as the two ends look very similar.
  • step 7: After the link is in place, install the nut and tighten it to the appropriate torque specification.
  • step 8: Put the tires back into the vehicle. Tighten the lug nuts as much as possible, but do not over tighten them. Excessive pressure on the car may knock it off the jack bracket.
  • step 9: Tighten the lug nut. After the vehicle returns to the ground, tighten the lug nut to the appropriate torque specification.If you want to change multiple anti-roll bar links, just repeat these steps on the other side.

 

                                                                

Notes:

  1. Please be sure to check carefully whether the part is suitable for your car model before placing an order
  2. If you have any questions after receiving the goods, please contact us in time, we will give you a satisfactory answer


1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

 

2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

 

3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

 tell us the new address within 12 hours after payment 

(no delivery to remote areas).

 

4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

 if there are any problems, contact us immediately please.

PayPal preferred.

 

Other payments accepted by ebay also can be accepted.

1. Products can be returned for no reason within 30 days of receipt

 (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

 

2. If the product does not match the description on the product page, we will exchange or refund the product for free 

within 30 days.

 

3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

 

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.