Product Description
1stpower-tech is a professional supplier since 2000, who always supply high quality performance parts with suspension, exhaust system and wheel accessories. Welcome to discuss bulk order or customize parts. Providing you the best service and innovative technology always are our pursuing.
1stpower-tech provide front Upper Control Arms (UCA) for Chevy, GMC, Ford, Dodge, Toyota, Nissan, Jeep and other trucks. The UCAs are CNC Bent Tubing, CNC Machined Bushing Housings and Sleeves. Usually, when you lift 2 "or more of your truck, OEM control arm would limit suspension travel,which will impact the driving performance. Upper control arms will solve the problem, which is designed for 2-4" lift.
- Correct the ball joint angle for 2-4” front leveling kits
- Constructed from 1.25” DOM tubing
- Maintains stock ride quality
- Instruction included
Application:
- 2006-2022 Dodge ram 1500 2WD 4WD
Updated Version 2.0
- 1.More Professional of the ball joint design,needn't add the grease additional.
- 2· Equipped with a protective cover to prevent silt from entering ball joint, extended using life.
- 3.The pin of the ball joint made from the heat treated alloy steel, more stronger and durable.
- 4. Pre-installed dust boot shields socket components from wear-causing contaminants, exceeded the factory.
- 5. The PU bushing instead of rubber bushing, improve maneuverability and Service life, and more suitable for harsh high and low-temperature environments.
- 6. The tubular part is made of high-quality cold-drawn steel pipe, which is helpful for chassis correction after the vehicle is lifted
- 7. The zerk with thread design is more convenient when adding grease
- 8. Power-coated Surface, wear-resistant and corrosion-resistant is better than paint, more suitable for an outdoor environment.
- 9. GREASEABLE SOCKET -- Reduces corrosion and abrasion by allowing new lubricant to flush contaminants.
|
|
|
|
|---|---|---|
Thicker DOM tubularThe 2.0 generation control arms adopt the larger diameter pipe, which is stronger and solid. |
PU bushingCompare to the rubber bushing, the pu bushing will bring a better driving performance. As a polymer material, polyurethane is superior to rubber in many aspects. Especially in extreme environments and temperatures. |
Powder coated surfaceMore smooth and beautiful. And not easy to rust and corrosion. |
Measuring Guide:
Measure your stock front and rear heights from the ground to bottom of the trim. The style of level or lift will determine how much height you will need to add to the front or rear. To level your vehicle, add a lift amount equivalent to the difference between front and rear heights.
To lift your vehicle - while retaining the stock look, add the same lift amount to both front and rear.
To level lift your vehicle, add the amount of lift you'd like for the front to the difference between front and rear stock heights and use this for your rear lift.
For example: if your stock height for the front is 23" and rear is 26" to level - add 3" lift to the front or to lift all corners 2" - add 2" to both front and rear.
Important Notice
- All the zerks can fill in grease after some use (pre-greased when you get it)
- Zerk just a decoration, sealed and pre-greased, so do not try to fill in anymore, otherwise you will damage it
- Do not torque the zerk too tight and It can turns to different directions(not must vertical)---the right and left zerks no need to the same directions
- The ball joint could not fill any grease.In order to solve this problem, we will provide a free replacement of the ball joint within 6 months; within one year, you can get the ball joint at half the discount.
- when you buy it,you could communicate with us,we will provide you with detail product information.and we will help you check if our products fit for you car model.
