The Power T2500-1bdCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1bdCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
Constant Power
Constant Power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads.
Class BD
Class BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
MEHSA
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
Punch Bass EQ
Pioneered by Jim Fosgate in the early 70's, Punch Bass compensates for acoustical problems common in all cars.
TO-247 MOSFETs
(left-OLD | right-NEW) Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.
- Constant Power Series Monoblock Class bD Car Amplifier
- RMS Power Rating (14.4V):
- 4 ohms: 1,500 watts x 1 chan.
- 2 ohms: 2,500 watts x 1 chan.
- 1 ohm: 2,500 watts x 1 chan.
- Dynamic Power Output: 2980 watts
- Remote bass level input (Punch PEQ remote level control sold separately)
- Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle
- LED power (blue), protect (yellow) and thermal (red) indicators
- Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
- Gyrator based punch EQ eliminates frequency shift with boost
- Mono channel operation
- PowerSync - allows 2 amplifiers to be "strapped" together
- Audiophile grade speaker connections
- Preamp Pass-Thru RCA outputs to daisy chain multiple amps
- 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy duty cast aluminum convection heatsink with Direct Thermal Management evenly distributes heat across the entire heatsink for improved efficiency
- Nickel-plated RCA level inputs
- Nickel-plated clamp wire terminals
- Input sensitivity:
- Level: 150mV-4V
- Variable low-pass filter (35-250 Hz, 24 dB/octave Butterworth)
- Selectable Infrasonic filter (12 dB/Octave, -3dB at 28 Hz)
- Phase Shift: 0-180 @deg;
- Damping factor: >200
- CEA-2006 compliant amplifier
- Frequency response: 20-250 Hz
- Designed and Engineered in the U.S.A.
- External 300A fuse required and sold separately
- Dimensions: 21-7/8"L x 8-3/16"W x 2-3/16"H
- Authorized Dealer
- 2 Year AutoSounds4less Warranty
Rockford Technology:
- Class bd topology is more efficient then class AB and has lower distortion than class D designs
- Constant Power technology instantaneously delivers maximum output power regardless of speakers varying impedance
- Differential input circuitry measures both (+) and (-) input signals and subtracts the noise creating a clean signal
- Discrete Surface Mount (DSM) components utilize 1% tight-tolerances improving efficiency, decreasing cross-talk and lowering operating temperatures
- MEHSA3 (Maximum Efficiency Heat Sink Application) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs output device lifespan
- Custom TO-247 MOSFETs have 60% more metal tab area increasing power capacity, lowering impedance and improving heat dissipation
Attention International customers: You are responsible for any and all customs, import duties, brokerage fees, and taxes. These charges are not included in the item price or stated shipping charges.
If your address is a PO BOX, FPO, MP, APO, there will be additional surcharge for shipping. Also if you are in AK, HI, PR, GU, SAIPAN OR U.S. Virgin Islands, there will be shipping surcharge needed. Please contact us for the shipping cost before purchasing.