ModuleMe Electronic
AC110-220V 7A 1-480min 16Mode Timer Adjustable Turn Off Delay Controller Module
Features:
1: Small size
2: Simple to use, wiring according to the detailed diagram
3: stable performance
4: Optional with shell without shell
5: Output voltage: AC110-220V Power supply voltage: AC 110-220V
1: Small size
2: Simple to use, wiring according to the detailed diagram
3: stable performance
4: Optional with shell without shell
5: Output voltage: AC110-220V Power supply voltage: AC 110-220V
Product parameters
AC 110V 220V On Delay Relay Switch AC 220V 7A Voltage Output Max 180Min Timer Adjustable Off
AC 110V 220V On Delay Relay Switch AC 220V 7A Voltage Output Max 180Min Timer Adjustable Off
Delay Controller:
1. Output current: 7A (MAX 10A)
2. Working power consumption: 43mA
3. Output voltage: AC110-220V
4. Power supply voltage: AC 110-220V
5. Weight with shell: 29 grams
6. Dimensions with shell: 57×35×20mm
7. Weight without shell: 19.1 grams
8. Dimensions without housing: 44×28×16mm
10. Unified line length: 50mm
11. Maximum standby power consumption: 12mA
12. Number of control channels: 1 output
13. Working temperature: -25℃~85℃
14. Working humidity: 5%~95%RH
15. Shell: high quality shell, dustproof and flame retardant
16. Function: Delay for a period of time to stop power supply
17. Control power: 1400W (max) incandescent lamp, energy saving lamp 300W (max)
18. With LED indicator to show the working status (constant light means working, flashing means the delay is over)
19. Applicable scene: living room, kitchen, bathroom, bedroom, corridor, stairs, etc.
20. Wide range of uses: such as exhaust fans, motors, air coolers, cooling fans, germicidal lamps, humidifiers, heaters, etc.
21. 16 delay modes to choose from (1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 25 minutes, 30 minutes, 40 minutes, 50 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, 240 minutes minutes, 300 minutes, 480 minutes)
Module function: This module is a delayed shutdown module. When the set delay time expires, the power supply is stopped.
1. Output current: 7A (MAX 10A)
2. Working power consumption: 43mA
3. Output voltage: AC110-220V
4. Power supply voltage: AC 110-220V
5. Weight with shell: 29 grams
6. Dimensions with shell: 57×35×20mm
7. Weight without shell: 19.1 grams
8. Dimensions without housing: 44×28×16mm
10. Unified line length: 50mm
11. Maximum standby power consumption: 12mA
12. Number of control channels: 1 output
13. Working temperature: -25℃~85℃
14. Working humidity: 5%~95%RH
15. Shell: high quality shell, dustproof and flame retardant
16. Function: Delay for a period of time to stop power supply
17. Control power: 1400W (max) incandescent lamp, energy saving lamp 300W (max)
18. With LED indicator to show the working status (constant light means working, flashing means the delay is over)
19. Applicable scene: living room, kitchen, bathroom, bedroom, corridor, stairs, etc.
20. Wide range of uses: such as exhaust fans, motors, air coolers, cooling fans, germicidal lamps, humidifiers, heaters, etc.
21. 16 delay modes to choose from (1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 25 minutes, 30 minutes, 40 minutes, 50 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, 240 minutes minutes, 300 minutes, 480 minutes)
Module function: This module is a delayed shutdown module. When the set delay time expires, the power supply is stopped.
Working status: After power on, the indicator light (PWR) is always on; after the delay is over, the indicator light (PWR) will continue to flash.
Instructions:
①: Set the time that needs to be delayed (live setting is not allowed);
②: After checking that the wiring is correct, power on. After power-on, the module starts to work (the indicator light is always on), and when the time is up, the module stops power supply (the indicator light flashes).
1. If you need to shut down in advance during use, you can directly disconnect the main power supply of the module.
2. Start the second time delay: power on again.
Delay time selection method:
①: Refer to the delay mode table to select the time to be delayed;
②: Toggle the DIP switch (red) according to the delay mode table;
③: After setting, check the wiring, and then power on.
Note: When a new delay mode needs to be set, in order to ensure personal safety, it must be set to power-off mode, and live operation is prohibited.
①: Set the time that needs to be delayed (live setting is not allowed);
②: After checking that the wiring is correct, power on. After power-on, the module starts to work (the indicator light is always on), and when the time is up, the module stops power supply (the indicator light flashes).
1. If you need to shut down in advance during use, you can directly disconnect the main power supply of the module.
2. Start the second time delay: power on again.
Delay time selection method:
①: Refer to the delay mode table to select the time to be delayed;
②: Toggle the DIP switch (red) according to the delay mode table;
③: After setting, check the wiring, and then power on.
Note: When a new delay mode needs to be set, in order to ensure personal safety, it must be set to power-off mode, and live operation is prohibited.
Package list:
1* AC110-220V timer adjustable off-delay controller module
1* AC110-220V timer adjustable off-delay controller module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.