First of all, thank you for purchasing our LED digital temperature controller W3001, which is a high precision temperature controller with an accurate temperature control of 0.1°C and a wide temperature control range of -50°C to 125°C. The high brightness LED display shows the readings clearly during the day and night. It can be used in all areas of temperature control.
Product Information:
Product name: LED digital display thermostat W3001
Product Model: DM-W3001
Supply voltage: DC12V/DC24V/AC110-220V(optional)
Temperature control accuracy: 0.1℃
Temperature measurement range: -50℃-125℃
Temperature control range: -50℃-125℃
Temperature measuring probe: NTC (10K 0.5%) waterproof sensor, approx. 0.5m long
Control mode: heating/cooling
Load power: DC12V-120W / AC220V-1500W
Output type: Direct output
Sensor type: NTC
External dimensions: 60mm*45mm*31mm (L*W*H)
Mounting hole distance: 73mm
Mounting hole diameter: 4mm
Housing material: ABS material
Product Features:
1.Automatic mode
2.Wide temperature control range
3.High temperature control accuracy
4.Reverse connection protection
5.Simple installation
Product name: Microcomputer temperature controller
Product Model:XH-W3001
Supply voltage：12/24/220V
Temperature measurement range: -50℃~110℃
Temperature control range: -50℃~110℃
Temperature control accuracy: 0.1℃
Load power: 120/240/1500W
Measurement input: NTC10K Waterproof probe L=1m
Output type: Direct output
Output capacity: max 10A
Installation hole distance: 73mm (4mm hole diameter)
External dimensions: 60*45*31mm
1*Digital Display Thermostat
W3001 Microcomputer controller instruction
Product name:Microcomputertemperature controller
Power supply:12V/24V/220V
Temperature detect range: -50℃-110℃
Temperature control range:-50℃-110℃
Temperature accuracy:0.1℃
Measurement input:NTC10K waterproof L=1m
Output type :Output direct
Max capacity :Max 10A
Installment pitch of holes:73MM (hole pitch 4MM)Panel introduction
Prompt：The input voltage and output voltage is synchronous of this temperature controller .In other words ,when temperature controller under the status of working (indicator light is
bright),input voltage equal to output voltage ,when temperature controller under the status of break (indicator light goes off),no voltage output from output terminal.
Indicator light bright means output from terminal.
Indicator light goes off means no output from terminal.
Heating mode setting solution
Setting method : Start-up temperature＜stop temperature(procedure judge the working mode as heating automatically)
Setting method:
Press the up-regulation keyboard ,light flashing when started-up temperature, set start temperature value by press up and down button.
Press the down-regulation keyboard ,light stop flashing when stopped temperature, set stop temperature value by press up and down button.
Use case:
Control water heater, stop heating at 65℃,reheating when temperature fallen to 50 ℃.
Setting solution:
STEP1:Make sure the working mode is heating, start-up temperature＜stop temperature
STEP2：Press up-regulation keyboard to start temperature flashing and set starting- temperature at 50 ℃ by pressed up and down button
STEP3：Press down-regulation keyboard , Stop tand down button.
Press down-regulation keyboard , stop temperaturemperature light flashing ,Setting up and down
button to stop temperature at 65 ℃ then complete setting.
Cooling mode setting solution
Setting method :Start-up temperature >Stop temperature (producer judge working mode as cooling automatically).
Setting method:
Press up-regulation keyboard ,start temperature flashing ,setting start temperature value by pressed up e flashing, setting stop temperature value by pressed up and down button.
Use case:
Control farm: blower regulate temperature at 26℃,it will start cooling again when temperature return 28℃ .
Setting method:
STEP1:Make sure the working mode is cooling ,started up temperature ＞ stop temperature
STEP2:Press up-regulation keyboard to start temperature flashing and set starting- temperature at 28 ℃ by pressed up and down button
STEP3:Press down-regulation keyboard to stop temperature flashing and stop temperature at 26 by pressed up and down button then complete setting.
Manual instruction
Setting start-up temperature
Press UP- regulation keyboard and display starting-up temperature press the up-regulation keyboard 3 seconds to start temperature digits flashing, Set value of temperature by up and down regulation keyboards.
Setting stop temperature.
Press the down-regulation keyboard to display stop-temperature ,press the down-regulation keyboard 3 seconds to stop temperature digits flashing.
Factory reset:
In the case of electricity, press the up and down regulation keyboard in the same time digital tube displaying “888” then strip into temperature detection automatically then restore factory s.