Drivegear kits - Bondtech
Bondtech transmission kit in hardened steel and protected on the surface.
Precision CNC machining.
Sharp teeth for maximum grip on the filament.
The perfect choice for a high performance power system.
Extremely high wear resistance due to the use of abrasive filaments.
These drive kits are supplied as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
Gear set for 1.75mm filament size, primary gear with 5mm inner diameter, secondary gear with two needle bearings, M3x2 set screw and a 3x20mm shaft.
Gear set for 1.75mm filament size, primary gear with 8mm inner diameter, secondary gear with integrated needle roller bearings, set screw M4x3 and a 4x22mm shaft.
Gear set for filament size 2.85 - 3.0mm, primary gear with 8mm inner diameter, secondary gear with integrated needle bearings, set screw M4x3 and a 4x22mm shaft.
It is recommended to use a lithium-based grease on the gear section and inside the needle roller bearings to avoid friction and wear. A small drop of fat is enough.
For technical specifications, please visit the support page dedicated to Bondtech products: https://support.bondtech.se
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase by reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT CONFORM TO THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renewing their electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portal ordiniinretepa.it (MePA).
Drivegear kits - Bondtech
Bondtech transmission kit in hardened steel and protected on the surface.
Precision CNC machining.
Sharp teeth for maximum grip on the filament.
The perfect choice for a high performance power system.
Extremely high wear resistance due to the use of abrasive filaments.
These drive kits are supplied as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
Gear set for 1.75mm filament size, primary gear with 5mm inner diameter, secondary gear with two needle bearings, M3x2 set screw and a 3x20mm shaft.
Gear set for 1.75mm filament size, primary gear with 8mm inner diameter, secondary gear with integrated needle roller bearings, set screw M4x3 and a 4x22mm shaft.
Gear set for filament size 2.85 - 3.0mm, primary gear with 8mm inner diameter, secondary gear with integrated needle bearings, set screw M4x3 and a 4x22mm shaft.
It is recommended to use a lithium-based grease on the gear section and inside the needle roller bearings to avoid friction and wear. A small drop of fat is enough.
For technical specifications, please visit the support page dedicated to Bondtech products: https://support.bondtech.se
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase by reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT CONFORM TO THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renewing their electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portal ordiniinretepa.it (MePA).
Listing made with Store360