General Information
Number of Products on MCB (16A Type B) (Max)
24
Operating and Electrical
Input Frequency
50 to 60 Hz
Mains voltage operation (DC)
168-275 V
Total Harmonic Distortion IEC (Max)
20 %
12V Output
No
Output Current Ripple (Max)
4 %
Maximum Efficiency
88 %
Power Factor 100% Load (Min)
0.9
Output Current (Max)
2000 mA
Output Current (Nom)
1350 mA
Output Current Tolerance (Max)
5 %
Input Voltage (AC)
220-240 V
Mains voltage performance (DC)
186-250 V
Earth Leakage Current (Max)
0.3 mA
Open Circuit Voltage (DC) (Max)
60 V
Input Current (Nom)
420 mA
Input Power (Nom)
75 W
Inrush Current Peak (Max)
21 A
Output Power (Max)
75 W
Output Power (Nom)
48 W
Output Voltage
27-54 V
Default output current
700-2000 mA
Inrush Current Width to 50% of Peak
220 µs
Energy Metering
False
Constant Current (CC)
True
Constant Voltage (CV)
False
Diagnostics
False
Wiring
Connector Type Input Terminals
Wago 744
Hot Wiring
No
Connector Type Output Terminals
Wago 744
Output Wire Cross Section (Max)
1.5 mm²
Output Wire Cross Section (Min)
0.5 mm²
Cable Length From Device to Lamp
4 m
Input wire strip length
8-9 mm
Output wire strip length
8-9 mm
Input Wire Cross Section (Max)
1.5 mm²
Input Wire Cross Section (Min)
0.5 mm²
Temperature
T-Ambient (Max)
50 °C
T-Ambient (Min)
-20 °C
T-Storage (Max)
85 °C
T-Storage (Min)
-25 °C
T-Case Lifetime (Nom)
75 °C
T-Case Maximum (Max)
75 °C
Maximum case temperature (in case of failure)
110 °C
Controls and Dimming
Control Interface
None
Mechanical and Housing
Housing
L360
Approval and Application
Surge Protection (Common/Differential)
EN61547 (L-L 1kV, L-G 2kV) kV
Relative Humidity (Operation) (Max)
90 %
Relative Humidity (Operation) (Min)
10 %
IP Classification
20
Isolation Classification
Class I and Class II
Short Circuit Protection
Protected
Over Power Protection
Protected
Open Circuit Protection
Protected
Approval Marks

CE marking

ENEC certificate

CCC certificate

SELV

Output Insulation
Double or reinforced insulated
Corridor Mode
False
Output Current Set Options
LEDset