Special Functions for Single-Car Manufacturer

DPF Regeneration for Single - Car Manufacturer Diagnosis
The most common reasons for DPF failures are: Short journeys where the engine doesn't reach optimum operating temperature. Clogged EGR Valve increasing diesel soot passed to the DPF. Faulty fuel injectors sending too much fuel to the air/fuel mixture. Performs DPF Regeneration to clear the blockage through continuous burning of the particulate matter captured in the DPF filter and turn off DPF warning light.

Battery Replacement for Single - Car Manufacturer Diagnosis
Register the new battery with the vehicle ECU after changing battery, lets you validate the new battery, clear fault information from the dashboard.

Not all vehicles need to do the battery reset after changing batteries.

Oil Service Reset for Single - Car Manufacturer Diagnosis
When the oil service light turns on, it allows you to reset the service lamps on the instrument cluster after you changing the oil.

Tips: Oil service reset function is determined by the actual condition of the vehicle.

Oil Service Reset for Single - Car Manufacturer Diagnosis
When the oil service light turns on, it allows you to reset the service lamps on the instrument cluster after you changing the oil.

Tips: Oil service reset function is determined by the actual condition of the vehicle.

More Functions for Single - Car Manufacturer Diagnosis

ABS Bleeding
The diagnostic tool can read and clear the ABS sensor error code and turn the warning light off. It supports ABS Bleeding. You can make a determination of what could be the causes of the error: low brake fluid, a blown fuse, or abnormal signals from wheel sensors.

TPMS Reset
If the TPMS (Tire Pressure Monitoring System) light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure. FX1000 car code reader can read and clear TPMS error codes and turn off the TPMS warning light after you replace the tire.

EPB Reset
EPB(Electrical Parking Brake) is a technology that realizes parking brake by electronic control. To reset the brake pad after replacing the brake pad. It can also clear codes and turn off the EPB light when it's done.