Visionking HD Digital zoom 3.5x Night Vision Goggle NVG-G1 Hunting Tactical new Night Vision Goggle NVG-G1
Packaging Details: Accessories 1x Night vision binoculars device 1x Head Strap 1x Type-c USB cable 1x Storage pouch 1x User manual 1x helmet mount bracket Over View
Parts overview: 1.Ocular 7.USB Port 2. IR button 8. TF card slot 3. Power button 9. Focus wheel 4. Connecting hole for Head Strap 10. Objector lens 5. Zoom button 11.Battery cover Objective 6. Snap button 12. Infrared Lens Visit My eBay Store: visionking-uk Specifications: ptiacal performance | Magnification | (1-3.5)×15 | | | Digital Zoom Max | 3.5x | | Angle of view | 22 | | F# for Objective lens | 1.3 | | video Output | 240x536 AMOLED | | OSD menu display | | Sensor | Size | 1/2.8 inch | | | Resolution | 1920X1080 | | Display | 240x536 AMOLED | | IRLED | 3W lnfared 940nm LED | | TF Card | Support sDHC | 4GB-128GB TF Card | | Operation | Preview | | Record MOV file in TF Card storage | | Playback media file from TF Card storage | | Power(Not included) | Excternal power supply - Dc | 5V/2A | | 2xCR123A Li battery | 4V-6V | | Size | LxWxH | 140mm105 mmx58mm | | weight | 300g | | package | USB cable/TF card/ Bag/Manua/Head Strap | |
Battery Installation Open battery cover and install the 2pcs CR123A batteries, being sure to follow the polarity markings inside the battery(Not included) compartment.Close the battery cover. Please pay attention to the direction of the battery. Inserting / Removing the TF card Insert the TF card into the TF card port and push until it locks in place. To remove the installed TF card, please push the TF card inward to release it. Storage capacity: 8GB or above is recommended Note: The device will show " Please insert SD card" if the TF card is not installed. Turning On/ off the Night vision Goggle Power On: Press and hold the 【Power button】for about 3 seconds to turn on the night vision goggle. And press the【Power button】again for about 3 seconds to turn off the night vision goggle. Key Button Functions 【POWER】 | Long press: Power ON/OFF Short press: short press this button to switch between video/playback/and menu | 【SNAP】 | In video mode: Press to take video. To stop recording, press this button again. In playback mode: Press to Play or stop play the video. In Menu mode: Press to select. | 【ZOOM】 | In video mode: Press to zoom out. In playback mode: Press to delete or protection the video In menu mode: Press to select the next menu listing. | 【IR】 | In Video mode: Press to turn on the infrared light. With each additional click, the IR brightness will increase. In playback mode: Press to select the next video. In menu mode: Press to select the previous menu listing. |
Record Video Function Record video: Press the [POWER] button and select the video mode. The icon appear in the top left corner of the screen. It means you enter the video function. Press the [SNAP] button to start recording video and press the [SNAP] button again to stop recording. Watching stored videos : Short press the [POWER] button and select playback mode. Press[SNAP]to play the video. Deleting Stored Videos : In playback mode, press the [ZOOM] button to select delete or protection the video. Focusing Target the object you would like to view and turn the focus wheel located just below the objective lens until the image on the screen is sharp and clear. The focusing wheel is No.9 in Parts overview picture. LCD Display Information. Display in Video mode 1 | Icon displaying that you are in Video Mode | 2 | Remaining time of recording | 3 | Battery power | 4 | Date/time | 5 | Digital zoom | 6 | Brightness of IR from 1 to 3(while plugging in USB power supply the IR brightness from 1 to 5) |
Using IR light in darkness This device can be used in complete darkness when using the built in IR (infrared) light. Press the [IR] button to activate the infrared light. Remove the IR Lens cover and press the [IR] button to select between the 3 levels of brightness (while plugging in USB power supply the IR brightness from 1 to 5). Transmitting stored videos and photos to a computer Using a USB cable, you can connect the night vision binoculars device to a computer. You can find the stored photo/video files on the computer by looking under “My computer \ removable disk”. Once the removable disk is selected, you can view, delete, move, or copy any video. Care and maintenance Clean the device only with a dry or slightly damp, lint-free cloth. Do not use abrasive cleaners to clean the device. This device is a high-precision optical instrument, so in order to avoid damage, please avoid the following practice: ●Use the device in ultra-high or ultra-low temperature. ●Keep it or use it in moist environment for long. ●Deliver or use it in strongly shocking environment. Note: Remove the batteries from the device if it is not used for a longer time.
Payment: We only accept PayPal payments . Payment is expected immediately at auction close. eBay item number, your full name and shipping address MUST be included in the PayPal payment. All our items will be shipped to buyer's Paypal address, Please update your address in Paypal before payment. Shipping and Handling: We usually arrange shipment within 2 business days of receipt of payments. A tracking number will be emailed to buyer at the time of shipment. Service: We accept return within 30 days after consumer receive item. And supply 2 years warranty for this item. And comsumer shall be responsible for the shipping fee. About Us: We are Visionking Optical Technology CO., LTD
We are professional optical products supplier,including Binoculars,Monocular,Rifle scope,range finder,night vision,astronomy telescope and many accessories Our trade mark "visionking" has been registered in EU(European Union) Large orders are welcome,any questions and needs,please send message to us If you are interestin in our products, please Check out my other items
! |