Description
Model: W1209
Dimensions: ABT 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range:-50 - 110 degrees centigrade
Resolution: When the temperature is 0.1 degree, the resolution is -9.9~99.9, and another temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High-Temperature Protection 0 - 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 - 60 degree centigrade; Humidity 20% - 85%
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
Press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease),
press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off;, indicates the relay is closed.
Digital LED Tubes: "LL" indicates sensor open, "HH" indicates over range, the relay will be forcibly disconnected; "---" indicates high-temperature alarm
Long press the "SET" button to enter the main menu settings,
Press " + or - " to switch between P0-P6,
then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.
Package Included
1pc Digital Temperature Controller Board
Policy
Same day shipping before 2 pm Meaning I will ship out all orders that arrive before 2 pm Queensland time
30 day return policy also I care about your customer experience and will be on your side always any problems just contact me
Model: W1209
Dimensions: ABT 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range:-50 - 110 degrees centigrade
Resolution: When the temperature is 0.1 degree, the resolution is -9.9~99.9, and another temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High-Temperature Protection 0 - 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 - 60 degree centigrade; Humidity 20% - 85%
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
Press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease),
press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off;, indicates the relay is closed.
Digital LED Tubes: "LL" indicates sensor open, "HH" indicates over range, the relay will be forcibly disconnected; "---" indicates high-temperature alarm
Long press the "SET" button to enter the main menu settings,
Press " + or - " to switch between P0-P6,
then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.
Package Included
1pc Digital Temperature Controller Board
Policy
Same day shipping before 2 pm Meaning I will ship out all orders that arrive before 2 pm Queensland time
30 day return policy also I care about your customer experience and will be on your side always any problems just contact me