• Fit for:
  • Thermostat With Seal For 2011-2014 Ram 1500 Truck 4-Door V8 5.7L Fits 41603

    Fit for:

    • 2005-10 Chrysler 300 V8 6.1L
    • 2005-16 Chrysler 300 V8 5.7L
    • 2012-14 Chrysler 300 V8 6.4L
    • 2007-09 Chrysler Aspen V8 5.7L
    • 2012-14 Dodge Challenger V8 6.4L
    • 2008-10 Dodge Challenger V8 6.1L
    • 2009-16 Dodge Challenger V8 5.7L
    • 2012-14 Dodge Charger V8 6.4L
    • 2006-10 Dodge Charger V8 6.1L
    • 2006-16 Dodge Charger V8 5.7L
    • 2011-14 Dodge Durango V8 5.7L
    • 2004-09 Dodge Durango V8 5.7L
    • 2006-08 Dodge Magnum V8 6.1L
    • 2005-08 Dodge Magnum V8 5.7L
    • 2003-10 Dodge Ram 1500 Truck V8 5.7L
    • 2003-10 Dodge Ram 2500 Truck V8 5.7L
    • 2003-09 Dodge Ram 3500 Truck V8 5.7L
    • 2006-10 Jeep Commander (XK) V8 5.7L
    • 2012-14 Jeep Grand Cherokee V8 6.4L
    • 2006-10 Jeep Grand Cherokee V8 6.1L
    • 2005-14 Jeep Grand Cherokee V8 5.7L
    • 2011-14 Ram 1500 Truck V8 5.7L
    • 2011-14 Ram 2500 Truck V8 5.7L
    • 2011-14 Ram 3500 Truck V8 5.7L

     

    Know about the Thermostat:

    • The Thermostat:The thermostat is a valve that controls the flow path of the coolant. It is an automatic temperature regulating device, usually containing temperature sensing components, through thermal expansion or cold contraction to open and close the flow of air, gas or liquid.
    • Function:The function of the thermostat is to keep the engine from overcooling. For example, after the engine is working normally, the temperature of the engine may be too low if there is no thermostat when it is driven in winter. At this time, the engine needs to temporarily stop water non-circulation to ensure that the engine temperature is not too low.
    • Location:Generally, the coolant of the water cooling system flows in from the body and flows out from the cylinder head. Therefore, the thermostat is generally installed at the water inlet where the water pump is installed. This is the junction of hot and cold water, and the most sensitive place. Its opening temperature is the temperature of the cooling water in the engine block, while its closing temperature is the temperature of a small part of the cold water that flows from the radiator through the thermostat into the cylinder block. The volume and range of its adjustment are relatively compared. It is small, so its fineness of adjustment is relatively fine, and it will not cause large fluctuations in the temperature of the engine block to make the engine run smoothly.

     

    ​Symptoms of a bad thermostat:

    • Engine Very Hot or Cold 

            We already know that the thermostat controls the engine temperature. So, the first thing that could put doubt in your mind is the engine’s temperature rating. If it’s too hot or too cold, chances are that the thermostat is not doing its job properly and it needs to be replaced. There could also be a problem with the radiator, or the coolant might have run out, so you need to check all the possibilities before you contemplate changing the thermostat. 

    • Erratic Temperature Change 

            The thermostat must ensure the engine remains at its operating temperature. It can do that by allowing more or less of the coolant from going inside the block. If the thermostat malfunctions, it will not be able to regulate the temperature levels as well as it used to and that will result in erratic temperature changes. 

    • Leaking Coolant 

            The only thing stopping the coolant from reaching the engine is the thermostat. If the thermostat valve spring is completely shut, the coolant won’t be able to pass. When this happens, the coolant will start to leak from several places. If you can spot a leak inside the engine bay or a patch of liquid beneath your car then the thermostat may have gone bad. If this happens, you will need a car thermostat replacement.

     

    Know how to replace the Thermostat:

    • Locate your thermostat if you haven't already done so.
    • Place a bucket under where you're going to be working.
    • Remove the clamp.
    • Pull off the hose.
    • Remove the bolts that hold the thermostat housing in place and lift out the old thermostat.
    • Lay the new gasket in place.
    • Drop in and secure the new thermostat.
    • Replace the hose and hose clamp.
    • Replace whatever fluid ran out of the hose by pouring it from the container into the radiator fill hole or coolant reservoir.

    Package include:

    1 Pc Thermostat


    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 10404845
    Type Thermostat Element
    Vintage Car Part No
    Manufacturer Warranty 1 Year
    Interchange Part Number 52028898AI
    OE/OEM Part Number 41603 48792 38792-E
    Superseded Part Number 449-203 416-203
    Packaging Type Box
    Material Plastic
    Fitment Type Direct Replacement
    Custom Bundle No
    Package Quantity 1
    Color As pictures shown
    Features Durability Tested
    Item Weight 2 LB
    Universal Fitment Yes
    Performance Part Yes
    Items Included O-Ring
    Feature ESCP

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Thermostat With Seal For 2011-2014 Ram 1500 Truck 4-Door V8 5.7L Fits 41603

    Fit for:

    • 2005-10 Chrysler 300 V8 6.1L
    • 2005-16 Chrysler 300 V8 5.7L
    • 2012-14 Chrysler 300 V8 6.4L
    • 2007-09 Chrysler Aspen V8 5.7L
    • 2012-14 Dodge Challenger V8 6.4L
    • 2008-10 Dodge Challenger V8 6.1L
    • 2009-16 Dodge Challenger V8 5.7L
    • 2012-14 Dodge Charger V8 6.4L
    • 2006-10 Dodge Charger V8 6.1L
    • 2006-16 Dodge Charger V8 5.7L
    • 2011-14 Dodge Durango V8 5.7L
    • 2004-09 Dodge Durango V8 5.7L
    • 2006-08 Dodge Magnum V8 6.1L
    • 2005-08 Dodge Magnum V8 5.7L
    • 2003-10 Dodge Ram 1500 Truck V8 5.7L
    • 2003-10 Dodge Ram 2500 Truck V8 5.7L
    • 2003-09 Dodge Ram 3500 Truck V8 5.7L
    • 2006-10 Jeep Commander (XK) V8 5.7L
    • 2012-14 Jeep Grand Cherokee V8 6.4L
    • 2006-10 Jeep Grand Cherokee V8 6.1L
    • 2005-14 Jeep Grand Cherokee V8 5.7L
    • 2011-14 Ram 1500 Truck V8 5.7L
    • 2011-14 Ram 2500 Truck V8 5.7L
    • 2011-14 Ram 3500 Truck V8 5.7L

     

    Know about the Thermostat:

    • The Thermostat:The thermostat is a valve that controls the flow path of the coolant. It is an automatic temperature regulating device, usually containing temperature sensing components, through thermal expansion or cold contraction to open and close the flow of air, gas or liquid.
    • Function:The function of the thermostat is to keep the engine from overcooling. For example, after the engine is working normally, the temperature of the engine may be too low if there is no thermostat when it is driven in winter. At this time, the engine needs to temporarily stop water non-circulation to ensure that the engine temperature is not too low.
    • Location:Generally, the coolant of the water cooling system flows in from the body and flows out from the cylinder head. Therefore, the thermostat is generally installed at the water inlet where the water pump is installed. This is the junction of hot and cold water, and the most sensitive place. Its opening temperature is the temperature of the cooling water in the engine block, while its closing temperature is the temperature of a small part of the cold water that flows from the radiator through the thermostat into the cylinder block. The volume and range of its adjustment are relatively compared. It is small, so its fineness of adjustment is relatively fine, and it will not cause large fluctuations in the temperature of the engine block to make the engine run smoothly.

     

    ​Symptoms of a bad thermostat:

    • Engine Very Hot or Cold 

            We already know that the thermostat controls the engine temperature. So, the first thing that could put doubt in your mind is the engine’s temperature rating. If it’s too hot or too cold, chances are that the thermostat is not doing its job properly and it needs to be replaced. There could also be a problem with the radiator, or the coolant might have run out, so you need to check all the possibilities before you contemplate changing the thermostat. 

    • Erratic Temperature Change 

            The thermostat must ensure the engine remains at its operating temperature. It can do that by allowing more or less of the coolant from going inside the block. If the thermostat malfunctions, it will not be able to regulate the temperature levels as well as it used to and that will result in erratic temperature changes. 

    • Leaking Coolant 

            The only thing stopping the coolant from reaching the engine is the thermostat. If the thermostat valve spring is completely shut, the coolant won’t be able to pass. When this happens, the coolant will start to leak from several places. If you can spot a leak inside the engine bay or a patch of liquid beneath your car then the thermostat may have gone bad. If this happens, you will need a car thermostat replacement.

     

    Know how to replace the Thermostat:

    • Locate your thermostat if you haven't already done so.
    • Place a bucket under where you're going to be working.
    • Remove the clamp.
    • Pull off the hose.
    • Remove the bolts that hold the thermostat housing in place and lift out the old thermostat.
    • Lay the new gasket in place.
    • Drop in and secure the new thermostat.
    • Replace the hose and hose clamp.
    • Replace whatever fluid ran out of the hose by pouring it from the container into the radiator fill hole or coolant reservoir.

    Package include:

    1 Pc Thermostat



    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.