GM Brick HTV is a polyurethane based material which is thicker than normal PU. The thicker PU Brick gives a raised 3d effect which looks striking and unique.
It has a wide application, and the cubic appearance is especially suitable for logo and symbols.

Features

• Specially created for use with the Cricut joy
• Use full roll width without a mat
• Use on the mat for small scraps and left overs- ensuring nothing goes to waste
• Plastic free packaging
• Polyurethane thick 3D vinyl
• Cubic appearance is especially suitable for logos, words and symbols.
• Ideal for creating sensory designs

Application instructions / wash settings

• Check our cut settings guidance blog before first use.
• Peel the corner to check for clear sheet side
• Clear sheet goes in face down, Vinyl side face up
• Cut your design in reverse and weed out excess after cutting
• Preheat garment for 10 seconds
• Apply at 140 – 150°C
• Apply with an Iron, or Heat press – see our Application blogs and guidance
• Medium-Firm Pressure- Do not use Teflon sheet
• Press front 9 seconds and then on reverse for 8 seconds
• Can be layered- check out our layering blogs for guidance
• Warm Peel
• Adheres to: 100% Cotton, 100% Polyester, 100% Poly & Cotton Blends, Lycra, Spandex and Neoprene
• Wash 24hrs after application inside out at 40°C or lower
• Tumble dry cool
• Avoid direct contact with Iron, Iron inside out and Do Not use steam!