These are the factory preload disks for the Korg Triton Rack. If you need to reload your factory setting then these are the disks you need. 

Loading the Preload Disks 

Insert Disk 1 into the disk drive, then press the DISK key.

1. Press to highlight PRELOAD.SNG :

2. Press the Page menu button Load in the upper right corner of the display.

3. Press Load selected from the popup menu that appears, and a dialog box will appear in the display.

4. Check the boxes Load PRELOAD.PCG too and Load PRELOAD.KSC too. A radio button will indicate

Clear, which means that the sample data you load will overwrite any previously loaded sample datafrom

the beginning of the sample memory area. (Note: If you were to select Append, the new samples

would load into the unused portion of sample memory - for now, make sure Clear is selected).

5. Press OK. The factory data will load. When the PRELOAD.KSC file loads, the display will indicate

Where is a GOSPE000.KMP file. At this point, the TRITON is looking for the sample data that the

PRELOAD.KSC script file is pointing to.

6. Eject disk 1 from the drive and insert disk 2, then press once - anywhere

on the display. The display will now recognize the new disk, and the PRELOAD folder will be

highlighted.

TRITON Training Guide

10

7. Press Select at the lower-right of the display. All of the sample data in the PRELOAD folder will load.

The display will then indicate "Writing into memory" - the data is loading into the TRITON's flash

memory area.

Any files on this disk are being provided free of charge and are readily available for download on the internet. We are charging only for the disk and labor involved in preparing the disk for your use.