A major problem-solving component for the road bike market . . . .
CLAMP-ON DOWNTUBE SHIFTER ADAPTER FITTED WITH INDUSTRY-STANDARD BOSSES -- FOR OVER-SIZED TUBING!
44mm inside diameter clamp.
This adapter features the industry standard bosses (sometimes known as "Campagnolo standard") compatible with all index downtube shifters. These are the bosses which were universally adopted across the entire cycling industry when index shifting became dominant in the 1980s. It is the standard found on any current production bike that is fitted with downtube shifter bosses.
This downtube shifter clamp allows the installation of index-era downtube shifters on more modern bikes with "oversize" tubing.
This clamp is made with a high-quality stainless steel hose-clamp, manufactured by a company in the USA. The band is stainless steel, the bolt is stainless, and the barrel nuts are zinc plated steel. Paddythepeddler re-manufactures the clamp, welding on brand-new Campagnolo-standard bosses in STAINLESS steel. Paddythepeddler performs the welding himself in his own workshop, using a precise laser-welding method which does not weaken or mar the original band. The new bosses are welded square and true, for perfect alignment and a clean appearance on the downtube of your road bike.
So this downtube clamp is compatible with almost all index downtube shifters ever made, as well as a considerable variety of vintage friction shifters!
ALSO compatible with all shift-cable barrel adjusters for Shimano STI, Campagnolo Ergo, and SRAM road bike shifters.
Paddythepeddler is compiling a list of downtube shifters that are compatible with this clamp. And also a list of ones that are not compatible. This is a work-in-progress, and not comprehensive. If you have more relevant info, or spot an error, by all means send the Peddler an email.
PARTIAL LIST OF COMPATIBLE DOWNTUBE SHIFTERS:
All Shimano SIS index downtube shifters, 6, 7, 8 & 9 speed.
All Shimano bar-end shifters, 7, 8, 9 & 10 speed.
Shimano SL-L422 ratchet downtube shifters
All Suntour Accushift downtube shifters, 6, 7 & 8 speed.
All Suntour downtube friction shifters designed for Campy bosses.
Simplex friction downtube shifters designed for Campy bosses.
Modolo friction shfiters designed for Campy bosses.
Sachs Aris New Success downtube index shifters.
Most Campagnolo downtube shifters from the late 1970s forward,
including Synchro and Synchro 2.
Simplex retro-ratchet downtube shifters provided they have 5mm bolts
Sturmey-Archer SLS50 T5 thumb/downtube shifter
Sturmey-Archer SLS50 B5 thumb/downtube shifter
Sturmey-Archer SLS50 S5 downtube shifter
Sturmey-Archer SLS30 T3 thumb/downtube shifter
Sturmey-Archer SLS30 B3 thumb/downtube shifter
Sturmey-Archer SLS30 S3 downtube shifter
Sturmey-Archer SLS3X T3 thumb/downtube shifter
Sturmey-Archer SLS3X R3B thumb/downtube shifter
PARTIAL LIST OF INCOMPATIBLE DOWNTUBE SHIFTERS:
Huret downtube shifters not designed for Campy bosses.
Shimano downtube shifters with the "dog tooth base", e.g. Arabesque,
Golden Arrow.
All Shimano and Suntour "aero" type downtube shifters that install on top
of the downtube.
Simplex downtube shifters not designed for Campy bosses.
Suntour Power and Suntour Mighty ratchet downtube shifters.
Many Campangolo downtube shifters from before the late 1970s
IMPORTANT NOTE REGARDING COMPATIBILITY OF SHIMANO DOWNTUBE SHIFTERS WITH "CURVED BASE" BOSS COVERS. (SEE LAST TWO PHOTOS). If your downtube shifters are the Shimano type with curved boss covers, the boss covers will require slight modification to fit this downtube clamp. What you need to do is file or grind about 3mm off the bottom edge of each boss cover, in other words take it down to just under 6mm thickness as shown in photo. To make sure you grind the bottom of each cover, it is advisable that you work on one side of the bike at a time and take notice of the 5mm-wide dog-tooth tab visible on the outboard face of the boss cover. In order to identify the bottom edge, it is essential to orient the dog-tooth pointing up the downtube. Then and only then, grind 3mm off the bottom edge of the cover. To repeat, it is best to work on one side of the bike at a time, so that you do not get confused. When you are done, you will have a unique left, and a unique right. If you grind the two covers to be identical to each other, then you have done it wrong.
The grinding is very easy to do if you are mechanically competent, using a rough hand file or small size cutting wheel. The boss covers are sometimes chromed brass, sometimes plastic, and sometimes soft steel, all easy to take down. If you have any doubt, consult a bike mechanic or send an email to Paddythepeddler.
IMPORTANT NOTE REGARDING OVAL AND TRIANGULAR PROFILE DOWNTUBES. This clamp will only work with round tubes, and with completely symmetrical oval tubing. Completely symmetrical means symmetrical on both the X and Y axis. Will NOT work with triangular tubing.
Happy Bidding!
=============================================================
PADDYTHEPEDDLER'S POLICIES AND PAYMENT INSTRUCTIONS:
COMBINED SHIPPING WELCOME FOR MULTIPLE ITEMS. GO AHEAD AND BID ON ANY AUCTIONS. AFTER YOU'VE WON, REQUEST AN INVOICE FOR COMBINED SHIPPING.
INSTANT PAYMENT OR PENDING ECHECK DUE WITHIN 7 DAYS UNLESS OTHERWISE AGREED BY SELLER. AFTER 7 DAYS AN UNPAID ITEM DISPUTE WILL BE FILED.
Lifetime warranty. Seller will replace or repair any clamp which fails due to inadequate materials or workmanship, provided failure not caused Buyer's abuse or neglect. For as long as Paddythepeddler owns and operates a laser welder. Buyer responsible for fit/mechanical compatibility and must pay all shipping charges if that is the basis of return, within 30 day period.
=============================================================