Product Description:
brand new high quality
Made of high quality material,
These create parts that are much more convenient and professional than using "captive nuts" (where you have to design a slot for the nut, then place the nut in the slot and hold it there while holding the screw). They can also be used in situations where certain retaining nuts don't work.
Insert them into holes in the print that are slightly smaller than the inserts, and use a soldering iron to melt the plastic around the inserts into place. The insert has a slight taper and small fins around which the plastic can flow, creating a very strong bond.
Instead of tweaking your design around the constraints of 3D printing (supports, print bed size, etc.), separate your parts into individual components that are held in place using these inserts and machine screws. Not only does this give you more flexibility when designing parts, but it also allows you to reprint only failed components rather than complete assemblies - saving time and money.
These are 1/4-20 thread, which is the correct size for most camera tripods.
Height/OAL is 0.3", *approximately* recommended hole size is 0.363", tapering to 0.349".
The depth should be approximately 0.030" greater than the OAL of the insert.
The optimal hole size for your application may vary due to several factors (3D pri nter calibration, material, temperature, etc.). This should be a good starting point for you to experiment to find the best value to use.
Package Included:
20 * brass nuts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.