TV Repair Tips – Read before Clicking the “BUY IT NOW” button!

Stanton Electronics

Sherrie Stanton

I want to thank -you for your purchase from me. Beforetrying this part to see if it remedies your situation, here are some repairtips you should read.

1.     No picture orwhen you turn the set on, it flashes and goes off. This is usually the LED Strips inside the displaypanel and NOT the Main Board or Power Supply.

2.     There are Verticaland/or horizontal lines in the picture.  This is most likely the Display paneland NOT the Main board and NOT the T-Con.

3.     There is a faintglow to the screen when turned but with no picture. (Sound might still work on some models).  The Display Panel is defective and usuallynot worth repairing.

4.      Dead, No picture, or sound. Sometimes this is the Power Board, but it canalso be the power cord, the wire harness from the Power board to the Main board,Main Board, or the Display Panel.

5.     Good picture onone side of the Screen. This ismost likely the T-con. Some TVs incorporate the T-Con into the Main Board. Itcould also be a ribbon cable going to the display panel or T-Con. If half ofthe picture is dark, it might be LED Strips are not working on one side. Or ifyour model has an LED driver board, it might be this part.

6.     Spider pattern oflines. This is a broken Display Panel. There is no repair for this.

7.     Dark spots or brightblotches in the picture. Where itis dark are LED lights that are not lit, and where it is brighter than normalmight indicate a lens fell of one of the LED Strips. In either case you canusually purchase the LED strips as individual strips. They are also sold as acomplete set.

8.     No Sound, pictureis fine.  This will be theSpeakers or the Main Board, or the connector to the speakers from the mainboard. Check the Menu on your TV making sure you don’t have it on External Speakers.

9.     No WiFi.This can be the WiFi Module, the connector from the Main Board to the WiFimodule or the Main Board. Sometimes an updated software will fix the problem.

10.  One of the Inputs/HDMI do not work.  Try Updating the Firmware in your sets menubefore replacing the Main Board.

I hope this helps, and sometimes purchasing a part is theonly way you can be sure in some situations. All our products sold have beentested and are in excellent condition before you get them. If what youpurchased does not fix your problem, we will take it back. It will help usif you return it telling us it did not solve the problem instead of stating itwas defective. If you state it was defective, we must have a technician autotest the product and that cost money.